[SOLVED] P2C20 Code: High Fuel Pressure During Cold Start – Fix Now!

The P2C20 fault code in automobiles indicates a problem with the high-pressure fuel pump. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause of this fault code could be a faulty high-pressure fuel pump, an open or shorted high-pressure fuel pump harness, or a poor electrical connection in the high-pressure fuel pump circuit.

It is important to address this issue promptly as it can lead to poor engine performance and reduced fuel efficiency.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2c20 fault code.

Here are the symptoms to look out for:

  • The P2C20 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine misfires, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience stalling or hesitation during acceleration, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe operation on the road.

The P2C20 automobile fault code can be caused by a faulty high pressure fuel pump, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2C20 can be caused by a faulty high pressure fuel pump.
  • It can also be caused by an open or shorted high pressure fuel pump harness.
  • Additionally, a poor electrical connection in the high pressure fuel pump circuit can also trigger this fault code.

To fix the p2c20 automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2c20, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2C20 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P2C20 will be between $75 and $150, depending on the repair time required. It is important to consider the repair time and cost when diagnosing and fixing this fault code.

The P2C20 fault code is related to the fuel pressure regulator’s performance during cold start.

The control module reads values from various sensors and adjusts engine actuators accordingly to ensure optimal engine performance. The fuel pressure regulator is a solenoid valve that controls the pressure in the fuel rail.

The DTC is set when the desired fuel rail pressure and the fuel rail pressure differ by more than 3 MPa (435 PSI) for over 30 seconds at idle speed.

What are the possible causes of the P2C20 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2C20 fault code. This code is usually caused by a faulty high-pressure fuel pump, an open or shorted high-pressure fuel pump harness, or a poor electrical connection in the high-pressure fuel pump circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the high pressure fuel pump?

If your engine light is on due to a faulty high pressure fuel pump, it’s important to visually inspect the wiring harness and connectors related to it. Check for any damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the high pressure fuel pump harness is open or shorted, or if there is a poor electrical connection in the circuit. Make sure to check the “Possible Causes” listed above before proceeding with the inspection.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P2C20 fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P2C20 fault code, you should visually inspect the related wiring harness and connectors. Check for any possible causes listed above, and fix the issue by replacing any damaged components or repairing any broken, bent, pushed out, or corroded connector’s pins. This will help to ensure that the engine light or service engine soon warning light is turned off and the vehicle is running smoothly.

p2c20 error fault code explained

If your engine light is on, it could be due to a faulty high pressure fuel pump, an open or shorted harness, or poor electrical connection. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top