[SOLVED] P2851 Code: Fixing Shift Fork Position Sensor Correlation Issue

The P2851 fault code in automobiles refers to an outdated or faulty Transmission Control Module (TCM) program or assembly.

The most common symptom of this fault is the illumination of the Engine Light or Service Engine Soon Warning Light.

The importance of repairing this fault lies in the fact that it can lead to transmission failure and other serious issues.

The repair difficulty is moderate, with a repair time of 1.0. To fix this issue, one must visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

It is crucial to reprogram or replace the TCM to resolve this issue.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2851 fault code.

Here are the symptoms to look out for:

  • The P2851 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • The vehicle may also experience reduced power or acceleration, and there may be a noticeable decrease in fuel efficiency.
  • Additionally, the vehicle may experience stalling or hesitation during acceleration, and there may be a grinding or whining noise coming from the transmission.

The automobile fault code p2851 can be caused by an outdated or faulty Transmission Control Module (TCM) program or a faulty Transmission Assembly.

  • The automobile fault code P2851 can be caused by several factors.
  • One of the causes is an outdated Transmission Control Module (TCM) program, which can be resolved by reprogramming the TCM.
  • Another cause is a faulty Transmission Control Module (TCM), which may require replacement.
  • Additionally, a faulty Transmission Assembly can also trigger the P2851 fault code.
  • It is important to address all of these potential causes to ensure proper functioning of the vehicle.

Below are the possible fixes for the automobile fault code p2851, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2851, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2851 indicates a problem with the clutch “B” pressure control solenoid circuit. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour. Other factors that may affect the cost include the location of the repair shop, the type of vehicle, and the availability of replacement parts.

The P2851 code is related to the shift fork position sensor in the transmission. There are two electric motors used to shift gears in the transmission, one for gears 1-3-5 and one for gears R-2-4-6. The motors are integrated into the Transmission Control Module (TCM) and work independently of each other.

The gear shifting is made by two shift drums connected to shift motor pinion via two ideal gears.

The maximum shift force is 1500N (337 lb). The P2851 code indicates a correlation issue between shift fork position sensors ‘A’ and ‘B’.

What are the possible causes of the automobile fault code P2851 that triggers the engine light or service engine soon warning light?

If you see the engine light or service engine soon warning light, it could be due to the P2851 fault code. The possible causes of this code are an outdated Transmission Control Module (TCM) program, a faulty TCM, or a faulty Transmission Assembly. To fix this issue, you should check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P2851 fault code related to the outdated Transmission Control Module (TCM) program or faulty Transmission Control Module (TCM)?

If you’re experiencing the P2851 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to an outdated Transmission Control Module (TCM) program or a faulty TCM. To fix this issue, you should first visually inspect the related wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector’s pins. If the issue persists, you may need to reprogram or replace the TCM or the entire Transmission Assembly.

What steps should be taken to visually inspect the wiring harness and connectors and check for damaged components in case of the P2851 fault code?

To fix the P2851 fault code, first check the possible causes such as outdated TCM program, faulty TCM, or faulty transmission assembly. Then, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded connector’s pins.

p2851 error fault code explained

If your engine light is on, it could be due to an outdated or faulty Transmission Control Module (TCM) program or assembly. Check for damaged components and inspect wiring harnesses and connectors. Reprogram or replace the TCM as necessary.

Scroll to Top