[SOLVED] P2842 Code: Low Shift Fork ‘d’ Position – Quick Fix Guide

The P2842 fault code in automobiles refers to an issue with the Transmission Control Module (TCM) program or the TCM itself.

The most common symptom of this fault is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this fault can be an outdated TCM program, a faulty TCM, or a faulty Transmission Assembly. The importance of repairing this fault lies in the fact that it can lead to transmission failure. The difficulty level of repairing this fault is moderate, with a repair time of 1.0.

To fix this issue, one must visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2842 fault code. Here are the symptoms to look out for:

  • The P2842 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include difficulty shifting gears, decreased fuel efficiency, and transmission slippage.
  • Additionally, the vehicle may experience a decrease in power or acceleration, and the transmission may fail to engage or disengage properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2842 can be caused by an outdated or faulty Transmission Control Module (TCM) or Transmission Assembly.

  • The automobile fault code P2842 can be caused by several factors.
  • One of the causes is an outdated Transmission Control Module (TCM) program, which can be resolved by reprogramming the TCM.
  • Another cause is a faulty Transmission Control Module (TCM), which may require replacement.
  • Additionally, a faulty Transmission Assembly can also trigger the P2842 fault code.
  • It is important to address all of these potential causes to ensure proper functioning of the vehicle.

Below are the possible fixes for the automobile fault code p2842, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2842, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2842 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2842 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2842 code is related to the position of the shift fork ‘D’ in the transmission. This fault code indicates that there is a low circuit in the shift fork ‘D’ position. The shift fork ‘D’ is responsible for shifting gears 1-3-5 in the transmission.

The electric motors used to shift gears in the transmission work independently of each other and are integrated in the Transmission Control Module (TCM).

The maximum shift force for the motors is 1500N (337 lb).

What are the possible causes of the P2842 automobile fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2842 fault code. The possible causes of this code are an outdated Transmission Control Module (TCM) program, a faulty TCM, or a faulty Transmission Assembly. To fix this issue, you need to check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P2842 automobile fault code?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light due to the P2842 fault code, there are a few possible causes. It could be due to an outdated Transmission Control Module (TCM) program, a faulty TCM, or a faulty Transmission Assembly. To fix the issue, visually inspect the related wiring harness and connectors for any damage or corrosion. Additionally, check for broken, bent, or pushed out connector pins.

What should be visually inspected when trying to fix the P2842 automobile fault code?

If you’re trying to fix the P2842 automobile fault code, start by visually inspecting the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. The cause of this issue could be an outdated Transmission Control Module (TCM) program, a faulty TCM, or a faulty Transmission Assembly. Check the “Possible Causes” listed above to determine the best course of action.

p2842 error fault code explained

If your engine light is on, it could be due to an outdated or faulty Transmission Control Module (TCM) program or assembly. To fix it, check for damaged components and inspect the wiring harness and connectors. Reprogramming the TCM may also be necessary.

Scroll to Top