[SOLVED] P2835 Code: How To Fix Intermittent Shift Fork ‘a’ Position Circuit

The P2835 fault code in automobiles refers to an issue with the Transmission Control Module (TCM) program or assembly. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause could be an outdated TCM program, faulty TCM, or faulty transmission assembly.

The repair importance is high as it affects the transmission’s performance and fuel efficiency. The repair difficulty is moderate, with a repair time of 1.0.

To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

It is crucial to check the possible causes listed above to interpret the fault code correctly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2835 fault code. Here are the symptoms to look out for:

  • The P2835 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty shifting gears or may not shift gears at all.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P2835 fault code can be caused by an outdated or faulty TCM program or a faulty transmission assembly.

  • The automobile fault code P2835 can be caused by an outdated Transmission Control Module (TCM) program.
  • It can also be caused by a faulty Transmission Control Module (TCM) or a faulty Transmission Assembly.
  • These are the three main causes of the P2835 fault code.

Below are the possible fixes for the automobile fault code p2835, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code p2835, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2835 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P2835 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2835 code is related to the shift fork ‘A’ position circuit.

This code indicates an intermittent issue with the circuit. The shift fork ‘A’ is responsible for shifting gears 1-3-5 in the transmission.

The issue may be caused by a faulty shift fork or a problem with the circuit wiring.

It is important to address this issue promptly to avoid further damage to the transmission.

A qualified mechanic can diagnose and repair the issue to ensure proper transmission function.

What are the possible causes of the P2835 automobile fault code and how can they be identified?

If you’re experiencing the P2835 fault code, your engine light may be on. This could be due to an outdated TCM program, a faulty TCM, or a faulty transmission assembly. To identify the cause, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins. The fix will depend on the specific cause, but reprogramming the TCM or replacing faulty components may be necessary.

How can a faulty Transmission Control Module (TCM) be fixed to resolve the P2835 fault code?

If you’re experiencing the P2835 fault code, which is indicated by the engine light or service engine soon warning light turning on, it could be due to an outdated or faulty Transmission Control Module (TCM) program or a faulty transmission assembly. To fix this issue, you should first visually inspect the related wiring harness and connectors for any damage or corrosion. Then, check for broken, bent, pushed out, or corroded connector pins. Finally, reprogram or replace the TCM as necessary.

What steps should be taken to visually inspect the wiring harness and connectors related to the P2835 fault code?

To visually inspect the wiring harness and connectors related to the P2835 fault code, first check the possible causes listed above. Then, inspect the related wiring harness and connectors for any damaged components. Look for broken, bent, pushed out, or corroded connector’s pins. This will help identify any issues with the outdated Transmission Control Module (TCM) program, faulty TCM, or faulty Transmission Assembly causing the Engine Light ON or Service Engine Soon Warning Light.

p2835 error fault code explained

If your engine light is on and you have fault code P2835, it could be due to an outdated or faulty Transmission Control Module (TCM) program or assembly.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion and check for broken or bent pins.

Reprogramming the TCM may also be necessary.

Scroll to Top