[SOLVED] P2826 Code: Low Voltage Fix For Transmission Control Solenoid Valve 9

The P2826 fault code in automobiles refers to a problem with the Transmission Control Solenoid Valve circuit.

This issue can cause the engine light to turn on, indicating a problem with the transmission system.

The possible causes of this fault code include low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, and poor electrical connection in the circuit. It is important to visually inspect the related wiring harness and connectors to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

The repair time for this issue is estimated to be around 1.0 hour.

Understanding and interpreting the fault code is crucial to identifying the problem and fixing it effectively.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2826 fault code. Here are the symptoms to look out for:

  • The P2826 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, transmission slippage, and decreased fuel efficiency.
  • Additionally, the vehicle may experience harsh shifting or fail to shift into certain gears.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2826 can be caused by a range of issues, including low transmission fluid level and faulty transmission control solenoid valve.

  • The automobile fault code P2826 can be caused by several factors.
  • These include a low transmission fluid level, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, an open or shorted Transmission Control Solenoid Valve harness, a poor electrical connection in the Transmission Control Solenoid Valve circuit, and a faulty Transmission Control Module (TCM).

Below are the possible fixes for the automobile fault code p2826, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2826, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2826 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the P2826 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2826 code is related to the Transmission Control Solenoid Valve Control Circuit.

The Transmission Control Solenoid Valve is an electronic pressure regulator that controls transmission line pressure.

The Diagnostic Trouble Code (DTC) is set when the Transmission Control Solenoid Valve Control Circuit commanded state does not match the actual state for greater than 1 second.

The P2826 code indicates that there is a low voltage in the Transmission Control Solenoid Valve 9 Control Circuit.

What are the possible causes of the P2826 automobile fault code?

If you’re experiencing the P2826 fault code, your engine light may be on. This could be due to a variety of causes, including low transmission fluid levels, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or a poor electrical connection in the Transmission Control Solenoid Valve circuit. To fix the issue, it’s important to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P2826 automobile fault code?

If you’re experiencing the P2826 fault code, which is indicated by the engine light being on, it could be due to low transmission fluid level, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or a poor electrical connection in the Transmission Control Solenoid Valve circuit. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

What should be visually inspected when trying to fix the P2826 automobile fault code?

If you’re trying to fix the P2826 automobile fault code, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cause of this code could be low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, Transmission Control Solenoid Valve harness is open or shorted, Transmission Control Solenoid Valve circuit poor electrical connection, or a faulty Transmission Control Module (TCM). Check the “Possible Causes” listed above.

p2826 error fault code explained

If you see the Engine Light ON, it could be due to low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, or a faulty Transmission Control Module (TCM). Check the possible causes listed above, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top