[SOLVED] P2820 Code: Fixing Pressure Control Solenoid ‘j’ Performance Issues

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2820 fault code.

This code indicates a problem with the Pressure Control Solenoid ‘J’ in the transmission system. The possible causes of this fault code include a faulty solenoid, an open or shorted harness, poor electrical connection, or blockage in the transmission valve body.

It is important to visually inspect the related wiring harness and connectors for any damage or corrosion.

The repair time for this fault code is 1.0, and it is crucial to fix it as soon as possible to avoid further damage to the transmission system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2820 fault code. Here are the symptoms to look out for:

  • The P2820 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, transmission slippage, and decreased fuel efficiency.
  • Additionally, the vehicle may experience a decrease in power or acceleration, and the transmission may fail to engage or disengage properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2820 can be caused by a faulty pressure control solenoid, open or shorted harness, poor electrical connection, or blockage in the transmission valve body.

  • The automobile fault code P2820 can be caused by a faulty Pressure Control Solenoid ‘J’.
  • It can also be caused by an open or shorted Pressure Control Solenoid ‘J’ harness.
  • Poor electrical connection in the Pressure Control Solenoid ‘J’ circuit can also trigger this fault code.
  • Additionally, a blockage in the Transmission Valve Body can also be a cause of the P2820 fault code.

Below are the possible fixes for the automobile fault code p2820, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P2820, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2820 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2820 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2820 code is related to the Pressure Control Solenoid ‘J’ in the transmission system of a vehicle. The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position.

The TCM then compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical problems. If the TCM detects a problem with the Pressure Control Solenoid ‘J’, it will trigger the P2820 code. This code indicates that the solenoid is either performing poorly or is stuck in the off position.

What are the possible causes of the P2820 automobile fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2820 fault code. This code is caused by a faulty Pressure Control Solenoid ‘J’, an open or shorted harness, poor electrical connection in the circuit, or a blockage in the Transmission Valve Body. To fix this issue, you should check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2820 fault code?

If you’re experiencing the P2820 fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to fix it. The cause of this issue could be a faulty pressure control solenoid ‘J’, an open or shorted harness, poor electrical connection, or a blockage in the transmission valve body. To address this problem, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of a blockage in the transmission valve body that can cause the P2820 fault code?

If you notice the engine light on or service engine soon warning light, it could be a sign of a blockage in the transmission valve body causing the P2820 fault code. This blockage can be caused by a faulty pressure control solenoid ‘J’, an open or shorted harness, or a poor electrical connection. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

p2820 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Pressure Control Solenoid ‘J’, an open or shorted harness, poor electrical connection, or blockage in Transmission Valve Body.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top