[SOLVED] P2807 Code: Fix Your Transmission Pressure Control Solenoid Now!

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2807 fault code. This code indicates a problem with the Pressure Control Solenoid ‘G’ in your automobile’s transmission system.

The cause could be a faulty solenoid, an open or shorted harness, poor electrical connection, or a blockage in the transmission valve body.

The repair importance is high as it can affect the performance of your vehicle. The repair difficulty is moderate, and it may take around 1.0 hour to fix. To fix the issue, you need to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2807 fault code.

Here are the symptoms to look out for:

  • The P2807 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, such as difficulty shifting or the transmission slipping.
  • The vehicle may also experience decreased fuel efficiency or a decrease in overall performance.
  • Additionally, the car may experience stalling or hesitation when accelerating, and there may be a noticeable decrease in power.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

There are several causes of the automobile fault code p2807, including a faulty pressure control solenoid and a blockage in the transmission valve body.

  • The automobile fault code P2807 can be caused by a faulty Pressure Control Solenoid ‘G’.
  • It can also be caused by an open or shorted Pressure Control Solenoid ‘G’ harness.
  • Poor electrical connection in the Pressure Control Solenoid ‘G’ circuit can also trigger this fault code.
  • Additionally, a blockage in the Transmission Valve Body can also be a cause of the P2807 fault code.

Below are the possible fixes for the automobile fault code p2807, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2807, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2807 indicates an issue with the transmission range sensor circuit. The estimated repair time for this fault code is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop. It is important to address this fault code promptly to avoid further damage to the transmission.

The P2807 code is related to the Pressure Control Solenoid ‘G’ in the transmission system of a vehicle. The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position.

The TCM then compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical problems. The P2807 code indicates that there is an issue with the Pressure Control Solenoid ‘G’, which can cause problems with shifting gears.

If left unaddressed, this issue can lead to further damage to the transmission system and potentially costly repairs. It is important to have this issue diagnosed and repaired as soon as possible to avoid further damage.

What are the possible causes of the automobile fault code P2807?

If you see the engine light on or the service engine soon warning light, it could be due to the P2807 fault code. This code is caused by a faulty pressure control solenoid ‘G’, an open or shorted harness, poor electrical connection in the circuit, or a blockage in the transmission valve body. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2807 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2807 fault code, there are a few things you can do to fix it. First, check the possible causes, which include a faulty Pressure Control Solenoid ‘G’, an open or shorted harness, poor electrical connection, or blockage in the Transmission Valve Body. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of a blockage in the transmission valve body that can cause the P2807 fault code?

If you notice the engine light on or service engine soon warning light, it could be a sign of a blockage in the transmission valve body causing the P2807 fault code. This blockage can be caused by a faulty pressure control solenoid ‘G’, an open or shorted harness, or a poor electrical connection. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

p2807 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Pressure Control Solenoid ‘G’, an open or shorted harness, poor electrical connection, or blockage in Transmission Valve Body.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top