[SOLVED] P2805 Code: How To Fix Transmission Range Sensor Correlation

The P2805 automobile fault code indicates a problem with the Transmission Range Sensor ‘AB’. This can cause the Engine Light to turn on, indicating a need for service.

The cause of this issue could be a faulty sensor or a poor electrical connection in the sensor circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for any damaged components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2805 fault code.

Here are the symptoms to look out for:

  • The P2805 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include difficulty shifting gears, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience harsh shifting or fail to shift into certain gears.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2805 can be caused by a faulty transmission range sensor or poor electrical connections.

  • The automobile fault code P2805 can be caused by a faulty Transmission Range Sensor ‘A’ or ‘B’.
  • It can also be caused by an open or shorted harness of the Transmission Range Sensor ‘A’ or ‘B’.
  • Additionally, a poor electrical connection in the circuit of the Transmission Range Sensor ‘A’ or ‘B’ can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2805, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2805, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2805 indicates a problem with the transmission range sensor circuit. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the problem, the type of vehicle, and the location of the repair shop.

It is important to address this issue promptly to avoid further damage to the transmission.

The P2805 fault code is related to the transmission range sensor. It indicates that there is a problem with the correlation between sensor ‘A’ and ‘B’. The range sensor is responsible for monitoring the gear selector position.

Live data can be used to verify the gear selector position. Calibration may be necessary after repairing the system.

What are the possible causes of the automobile fault code P2805?

If you see the engine light on or the service engine soon warning light, it could be due to the P2805 fault code. This code is usually caused by a faulty transmission range sensor ‘A’/’B’, an open or shorted harness, or a poor electrical connection in the transmission range sensor ‘A’/’B’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2805 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2805 fault code, you can fix it by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the cause is a faulty Transmission Range Sensor ‘A’/’B’, an open or shorted harness, or a poor electrical connection in the Transmission Range Sensor ‘A’/’B’ circuit.

What are the signs of a faulty Transmission Range Sensor ‘A’/’B’ that triggers the P2805 fault code?

If you notice the engine light or service engine soon warning light on, it could be a sign of a faulty Transmission Range Sensor ‘A’/’B’ that triggers the P2805 fault code. This issue can be caused by a faulty sensor, an open or shorted harness, or a poor electrical connection. To fix the problem, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p2805 error fault code explained

If your engine light is on, it could be due to a faulty transmission range sensor ‘AB’, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top