[SOLVED] P2795 Code: Fixing High Gear Shift Direction Circuit

The P2795 automobile fault code indicates a problem with the transmission range sensor or shifter circuit. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause could be a defective range sensor, faulty transmission shifter, or poor electrical connection in the transmission shifter circuit. The repair importance is high as it affects the transmission’s performance.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors for damage and checking for broken or corroded connector pins. The repair time is estimated at 1.0 hour. It is essential to interpret the fault code to identify the problem accurately and take appropriate action.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2795 fault code. Here are the symptoms to look out for:

  • The P2795 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, decreased fuel efficiency, and difficulty accelerating.
  • Additionally, the vehicle may experience transmission slippage, harsh shifting, or a complete failure to shift.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2795 can be caused by a range of issues, including a defective range sensor and faulty transmission shifter.

  • The automobile fault code P2795 can be caused by a defective range sensor.
  • It can also be caused by a faulty transmission shifter.
  • Another cause of this fault code is an open or shorted transmission shifter harness.
  • Additionally, a poor electrical connection in the transmission shifter circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code: p2795, including inspecting wiring harness, connectors, and damaged components.

  • To fix the automobile fault code P2795, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2795 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosis and fixing the P2795 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2795 code is related to the Gear Shift Direction Circuit signal. The Transmission Control Module (TCM) monitors this signal.

If the signal is out of factory specifications, the TCM sets the OBDII code. The P2795 code specifically indicates that the Gear Shift Direction Circuit signal is high.

What are the possible causes of the P2795 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2795 fault code. This code is caused by a defective range sensor, faulty transmission shifter, open or shorted transmission shifter harness, or poor electrical connection in the transmission shifter circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2795 fault code?

If you’re experiencing the P2795 fault code, which can be caused by a defective range sensor, faulty transmission shifter, or poor electrical connection in the transmission shifter circuit, you can visually inspect the related wiring harness and connectors to fix the issue. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. It’s important to check the “Possible Causes” listed above before proceeding with any repairs.

What are the steps to take when checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins to fix the P2795 fault code?

If you’re experiencing the P2795 fault code, start by checking the possible causes, which include a defective range sensor, faulty transmission shifter, open or shorted transmission shifter harness, or poor electrical connection in the transmission shifter circuit. Visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

p2795 error fault code explained

If your engine light is on, it could be due to a defective range sensor, faulty transmission shifter, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components listed under “Possible Causes” to fix the issue.

Scroll to Top