[SOLVED] P2793 Code: Fixing Gear Shift Direction Circuit Issues

The P2793 fault code in automobiles refers to a problem with the transmission range sensor circuit. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause of this issue could be a defective range sensor, faulty transmission shifter, or poor electrical connection in the transmission shifter circuit.

It is important to address this issue promptly as it can lead to further damage to the transmission. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2793 fault code.

Here are the symptoms to look out for:

  • The P2793 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, transmission slippage, decreased fuel efficiency, and difficulty accelerating.
  • Additionally, the vehicle may experience harsh shifting or fail to shift into certain gears.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2793 can be caused by a range of issues, including a defective range sensor and faulty transmission shifter.

  • The automobile fault code P2793 can be caused by a defective range sensor.
  • It can also be caused by a faulty transmission shifter.
  • Another cause of this fault code is an open or shorted transmission shifter harness.
  • Additionally, a poor electrical connection in the transmission shifter circuit can also trigger this fault code.

To fix the automobile fault code p2793, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P2793, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2793 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the P2793 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2793 code is related to the Gear Shift Direction Circuit signal. The Transmission Control Module (TCM) is responsible for monitoring this signal. If the Gear Shift Direction Circuit signal is not within factory specifications, the TCM will set the P2793 code.

This fault code indicates that there is an issue with the Gear Shift Direction Circuit. It is important to address this issue promptly to avoid further damage to the transmission.

A qualified mechanic should be consulted to diagnose and repair the problem.

What are the possible causes of the automobile fault code P2793?

If you see the engine light on or the service engine soon warning light, it could be due to the P2793 fault code. This code can be caused by a defective range sensor, faulty transmission shifter, open or shorted transmission shifter harness, or poor electrical connection in the transmission shifter circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2793 fault code?

If you’re experiencing the P2793 fault code, which can cause the engine light to turn on, you may have a defective range sensor, faulty transmission shifter, or a poor electrical connection in the transmission shifter circuit. To fix this issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This will help you identify any open or shorted circuits and get your vehicle back on the road.

What are the steps to take when checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins to fix the P2793 fault code?

If you’re experiencing the P2793 fault code, start by checking the possible causes, which include a defective range sensor, faulty transmission shifter, open or shorted transmission shifter harness, or poor electrical connection in the transmission shifter circuit. Visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

p2793 error fault code explained

If your engine light is on, it could be due to a defective range sensor, faulty transmission shifter, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins.

Inspect the components listed above to fix the issue.

Scroll to Top