[SOLVED] P278D Code: High Circuit In Kick Down Switch – Quick Fix

The P278D automobile fault code refers to a problem with the kick-down switch circuit, which can cause the engine light to turn on.

This fault code can be caused by a faulty kick-down switch, an open or shorted harness, or a poor electrical connection.

To fix this issue, it is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated to be around 1.0 hour. It is crucial to interpret the fault code correctly to ensure that the issue is resolved effectively.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p278d fault code. Here are the symptoms to look out for:

  • The P278D fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include transmission shifting issues, decreased fuel efficiency, and decreased engine power.
  • Additionally, the vehicle may experience difficulty accelerating or shifting gears, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p278d can be caused by a faulty or openshorted Kick Down Switch and poor electrical connection.

  • The automobile fault code P278D can be caused by a faulty Kick Down Switch.
  • It can also be caused by an open or shorted Kick Down Switch harness.
  • Additionally, a poor electrical connection in the Kick Down Switch circuit can also trigger this fault code.

To fix the automobile fault code p278d, check the possible causes and inspect related components for any damage or corrosion.

  • To fix the automobile fault code p278d, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P278D can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P278D fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P278D code is related to the Kick Down Switch Circuit signal.

The Transmission Control Module (TCM) monitors this signal. If the signal is out of factory specifications, the TCM sets the OBDII code. The P278D code specifically indicates that the Kick Down Switch Circuit signal is high.

What are the possible causes of the P278D automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P278D fault code. This code is often caused by a faulty kick-down switch, an open or shorted kick-down switch harness, or a poor electrical connection in the kick-down switch circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors related to the Kick Down Switch?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Kick Down Switch or an open or shorted Kick Down Switch harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify the root cause of the problem and take the necessary steps to fix it.

What are the consequences of not fixing the P278D fault code in a timely manner?

Ignoring the P278D fault code can lead to serious consequences such as reduced fuel efficiency, engine misfires, and even engine failure. The fault code is caused by a faulty kick-down switch or poor electrical connection, which can be visually inspected and fixed by checking the wiring harness and connectors. It is important to address the issue promptly to avoid further damage and costly repairs.

p278d error fault code explained

If your engine light is on and the fault code is p278d, it may be due to a faulty kick down switch or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out connector pins.

Scroll to Top