[SOLVED] P2779 Code: How To Fix Downshift Switch Circuit Range/Performance

The P2779 fault code in automobiles refers to a problem with the downshift switch circuit, which can cause the engine light to turn on.

This fault code can be caused by a faulty downshift switch, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the vehicle’s performance and fuel efficiency. The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion and checking for broken or bent pins.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2779 fault code. Here are the symptoms to look out for:

  • The P2779 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, such as delayed or harsh shifting, or the transmission slipping.
  • The vehicle may also experience a decrease in fuel efficiency or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2779 can be caused by a faulty downshift switch, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2779 can be caused by a faulty downshift switch.
  • It can also be caused by an open or shorted downshift switch harness.
  • Additionally, a poor electrical connection in the downshift switch circuit can also trigger this fault code.

To fix the automobile fault code p2779, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2779, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2779 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2779 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2779 code is related to the Downshift Switch Circuit signal. The Engine Control Module (ECM) is responsible for monitoring this signal.

If the signal is not within the factory specifications, the ECM will set the OBDII code. The P2779 code specifically refers to the Downshift Switch Circuit RangePerformance. This fault code can indicate a problem with the transmission or the wiring connected to the downshift switch.

It is important to address this issue promptly to avoid further damage to the vehicle.

What are the possible causes of the P2779 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2779 fault code. This code is caused by a faulty downshift switch, an open or shorted downshift switch harness, or a poor electrical connection in the downshift switch circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2779 fault code?

If you’re experiencing the P2779 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may need to visually inspect the related wiring harness and connectors. This fault code is caused by a faulty Downshift Switch, an open or shorted Downshift Switch harness, or a poor electrical connection in the Downshift Switch circuit. To fix the issue, check the possible causes listed above and inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins.

What are the specific steps I can take to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the P2779 fault code?

If you’re experiencing the P2779 fault code, start by checking the possible causes: a faulty downshift switch, an open or shorted downshift switch harness, or a poor electrical connection in the downshift switch circuit. Visually inspect the wiring harness and connectors, looking for any damage or broken, bent, pushed out, or corroded connector pins. This will help you identify any damaged components and allow you to fix the issue.

p2779 error fault code explained

If your engine light is on, it could be due to a faulty downshift switch, open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top