[SOLVED] P2777 Code: High Upshift Switch Circuit – Quick Fix Guide

The P2777 fault code in automobiles refers to a problem with the upshift switch, which can cause the engine light to turn on.

This issue can be caused by a faulty upshift switch, an open or shorted harness, or a poor electrical connection in the upshift switch circuit.

To fix the problem, it is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0.

If you encounter this fault code, it is crucial to address it promptly to avoid any further damage to your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2777 fault code.

Here are the symptoms to look out for:

  • The P2777 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include transmission shifting issues, decreased fuel efficiency, and engine stalling or hesitation.
  • Additionally, the vehicle may experience difficulty accelerating or shifting gears, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2777 can be caused by a faulty upshift switch, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2777 can be caused by a faulty upshift switch.
  • It can also be caused by an open or shorted upshift switch harness.
  • Additionally, a poor electrical connection in the upshift switch circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2777, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2777, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2777 indicates a problem with the torque converter clutch solenoid valve circuit.

The estimated repair time for this issue is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop. It is important to address this issue promptly to avoid further damage to the vehicle.

The P2777 code is related to the Upshift Switch Circuit signal. The Engine Control Module (ECM) is responsible for monitoring this signal. If the signal is not within the factory specifications, the ECM will set the OBDII code.

The P2777 code specifically indicates that the Upshift Switch Circuit signal is high. This means that the signal is above the acceptable range, which can cause issues with the vehicle’s transmission. It is important to address this issue promptly to avoid further damage to the vehicle.

What are the possible causes of the P2777 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2777 fault code. This code is caused by a faulty upshift switch, an open or shorted upshift switch harness, or a poor electrical connection in the upshift switch circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2777 fault code?

If you’re experiencing the P2777 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can fix it by visually inspecting the related wiring harness and connectors. This fault code is caused by a faulty Upshift Switch, an open or shorted Upshift Switch harness, or a poor electrical connection in the Upshift Switch circuit. To fix it, check the possible causes listed above and look for damaged components. Check for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the P2777 fault code and not fixing it in a timely manner?

Ignoring the P2777 fault code, which indicates a faulty upshift switch or poor electrical connection, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle may experience transmission issues, such as difficulty shifting gears or stalling. It is important to promptly inspect the wiring harness and connectors and fix any damaged components to avoid further damage and costly repairs.

p2777 error fault code explained

If your engine light is on, it could be due to a faulty upshift switch, open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out connector pins.

Scroll to Top