[SOLVED] P2773 Code: Fixing Four Wheel Drive Low Switch Circuit

The P2773 fault code in automobiles refers to a problem with the Four Wheel Drive Low Switch. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty switch, an open or shorted harness, or a poor electrical connection.

It is important to address this problem promptly as it can lead to further damage to the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour. It is crucial to interpret the fault code correctly to ensure the proper repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2773 fault code.

Here are the symptoms to look out for:

  • The P2773 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, such as difficulty shifting or the transmission slipping.
  • The vehicle may also experience decreased fuel efficiency or a decrease in power while driving.
  • Additionally, the car may experience stalling or hesitation while accelerating, and there may be a noticeable decrease in overall performance.

The automobile fault code p2773 can be caused by a faulty switch, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2773 can be caused by a faulty Four Wheel Drive Low Switch.
  • It can also be caused by an open or shorted Four Wheel Drive Low Switch harness.
  • Additionally, a poor electrical connection in the Four Wheel Drive Low Switch circuit can also trigger this fault code.

To fix the automobile fault code p2773, check the possible causes and inspect related components for any damage or corrosion.

  • To fix the automobile fault code p2773, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2773 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the P2773 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2773 code is related to the Four Wheel Drive Low Switch Circuit. The Transmission Control Module (TCM) keeps an eye on this circuit’s signal.

If the Four Wheel Drive Low Switch Circuit is not within the factory specifications, the TCM sets the P2773 code. This code indicates that the Four Wheel Drive Low Switch Circuit is low.

What are the possible causes of the P2773 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2773 fault code. This code is caused by a faulty four-wheel-drive low switch, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can I fix the P2773 automobile fault code?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a faulty Four Wheel Drive Low Switch, an open or shorted harness, or poor electrical connection. To fix the P2773 fault code, inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out connector pins and replace any damaged components as necessary.

What should I visually inspect to troubleshoot the P2773 automobile fault code?

If you’re experiencing the P2773 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code is usually caused by a faulty Four Wheel Drive Low Switch, an open or shorted Four Wheel Drive Low Switch harness, or a poor electrical connection in the Four Wheel Drive Low Switch circuit.

p2773 error fault code explained

If your engine light is on, it could be due to a faulty Four Wheel Drive Low Switch or an openshorted harness. To fix it, visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Scroll to Top