[SOLVED] P2772 Code: Fixing Four Wheel Drive Low Switch Circuit Issues

The P2772 fault code in automobiles refers to a problem with the Four Wheel Drive Low Switch. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this issue could be a faulty switch, an open or shorted harness, or a poor electrical connection.

It is important to address this problem promptly as it can lead to further damage to the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2772 fault code. Here are the symptoms to look out for:

  • The P2772 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, such as delayed or harsh shifting, or the transmission slipping.
  • The vehicle may also experience a decrease in fuel efficiency or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2772 can be caused by a faulty switch, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2772 can be caused by a faulty Four Wheel Drive Low Switch.
  • It can also be caused by an open or shorted Four Wheel Drive Low Switch harness.
  • Additionally, a poor electrical connection in the Four Wheel Drive Low Switch circuit can also trigger this fault code.

To fix the automobile fault code p2772, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p2772, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2772 indicates a problem with the input signal from the turbine speed sensor in the transmission. The estimated repair time for this fault code is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the problem, the type of vehicle, and the location of the repair shop.

The P2772 code is related to the Four Wheel Drive Low Switch Circuit signal. The Transmission Control Module (TCM) is responsible for monitoring this signal. If the Four Wheel Drive Low Switch Circuit is not within the factory specifications, the TCM will set the P2772 code.

This code indicates that there is an issue with the range or performance of the Four Wheel Drive Low Switch Circuit. It is important to address this issue promptly to ensure proper functioning of the vehicle’s four-wheel drive system.

What are the possible causes of the P2772 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2772 fault code. This code is caused by a faulty four-wheel-drive low switch, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the related wiring harness and connectors to fix the P2772 fault code?

If you’re experiencing the P2772 fault code, start by checking the “Possible Causes” listed above. To visually inspect the related wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Four Wheel Drive Low Switch harness and circuit connection, which could be causing the Engine Light to turn on.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P2772 fault code?

If you’re fixing the P2772 fault code, look out for the engine light or service engine soon warning light. The cause could be a faulty four-wheel-drive low switch, an open or shorted harness, or a poor electrical connection. To fix it, check the possible causes and visually inspect the wiring harness and connectors. Be sure to look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

p2772 error fault code explained

If your engine light is on and you have a faulty Four Wheel Drive Low Switch, an open or shorted harness, or a poor electrical connection, visually inspect the wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top