[SOLVED] P273A Code: How To Fix Transmission Friction Element ‘g’ Performance

The P273A fault code in automobiles is a common issue that triggers the engine light or service engine soon warning light.

The symptoms of this fault code include a decrease in fuel efficiency, difficulty in shifting gears, and a decrease in engine power. The cause of this fault code can be due to low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, or steering gear internal failure. The repair of this fault code is of utmost importance as it can lead to severe damage to the vehicle’s engine and transmission.

The repair difficulty is moderate, and the repair time is estimated to be around 1.0 hours. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p273a fault code. Here are the symptoms to look out for:

  • The P273A fault code in an automobile can cause several symptoms, including the illumination of the engine light or service engine soon warning light.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty shifting gears, and the transmission may fail to engage or disengage properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P273A fault code in automobiles can be caused by a range of issues, including low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, and steering gear internal failure.

  • The automobile fault code P273A can be caused by low tire air pressure.
  • It can also be caused by a damaged steering gear bellows boot.
  • Contaminated gear/rack is another cause of this fault code.
  • Inner tie rods can also lead to the P273A fault code.
  • Lastly, steering gear internal failure can cause this fault code to appear.

Below are some possible fixes for the automobile fault code p273a, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p273a, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P273A has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P273A will range between $75 and $150, depending on the repair time required.

The P273A fault code is related to the Transmission Friction Element ‘G’ Apply Time RangePerformance. This code is triggered when the Power Steering Control Module (PSCM) detects an issue with the amount of force needed to assist with vehicle steering.

The PSCM will monitor this when the ignition is ON and the voltage supply to the PSCM is above 6 volts, all other Electric Power-Assisted Steering (EPAS) sensors are functioning correctly and the EPAS gear is providing assist.

What are the possible causes of the P273A automobile fault code that triggers the engine light or service engine soon warning light?

The P273A fault code triggers the engine light or service engine soon warning light. The possible causes include low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, and steering gear internal failure. To fix the issue, one should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

How can one identify the root cause of the P273A fault code, and what steps should be taken to fix it?

If you notice the engine light ON or Service Engine Soon Warning Light, it could be due to the P273A fault code. The possible causes include low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, or steering gear internal failure. To fix it, visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What are the potential damages that can occur if the P273A fault code is ignored, and how urgent is it to address this issue?

Ignoring the P273A fault code can lead to potential damages such as reduced fuel efficiency, tire wear, and steering issues. The cause of this code could be low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, or steering gear internal failure. It is urgent to address this issue as soon as possible by visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p273a error fault code explained

If your engine light is on, it could be due to low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, or steering gear internal failure. Check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top