[SOLVED] P2737 Code: Fixing Transmission Control Solenoid Valve 6 Performance

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2737 fault code.

This code is related to the transmission system and can be caused by a low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, or a poor electrical connection in the Transmission Control Solenoid Valve circuit. The repair importance of this code is high as it can lead to transmission failure if left unaddressed.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

The repair time is estimated to be around 1.0 hour. It’s essential to interpret the fault code correctly to avoid further damage to your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2737 fault code. Here are the symptoms to look out for:

  • The P2737 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty starting or may stall while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2737 can be caused by a variety of factors, including low transmission fluid level and faulty transmission control solenoid valve.

  • The automobile fault code P2737 can be caused by several factors.
  • These include a low transmission fluid level, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, an open or shorted Transmission Control Solenoid Valve harness, a poor electrical connection in the Transmission Control Solenoid Valve circuit, and a faulty Transmission Control Module (TCM).

Below are some possible fixes for the automobile fault code p2737, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2737, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2737 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2737 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2737 code is related to the Transmission Control Solenoid Valve. This valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings.

The Diagnostic Trouble Code (DTC) is set when the Transmission Control Solenoid Valve Control Circuit commanded state does not match the actual state for greater than 1 second. The P2737 code specifically refers to Transmission Control Solenoid Valve 6 Performa.

What are the possible causes of the automobile fault code P2737?

If you see the engine light on or service engine soon warning light, it could be due to the P2737 fault code. This code can be caused by a low transmission fluid level, dirty transmission fluid, faulty transmission control solenoid valve, open or shorted transmission control solenoid valve harness, poor electrical connection in the transmission control solenoid valve circuit, or a faulty transmission control module (TCM). To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.

How can one fix the P2737 fault code in their automobile?

If you’re experiencing the P2737 fault code in your automobile, indicated by the engine light or service engine soon warning light, it could be due to low or dirty transmission fluid, a faulty transmission control solenoid valve, or a poor electrical connection. To fix it, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

What should be visually inspected when trying to fix the P2737 fault code?

If you’re trying to fix the P2737 fault code, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Also, check the possible causes listed above, which include low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, open or shorted Transmission Control Solenoid Valve harness, poor electrical connection in the Transmission Control Solenoid Valve circuit, or a faulty Transmission Control Module (TCM).

p2737 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the P2737 code, check the transmission fluid level and inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

It could be caused by low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, Transmission Control Solenoid Valve harness is open or shorted, Transmission Control Solenoid Valve circuit poor electrical connection, or faulty Transmission Control Module (TCM).

Scroll to Top