[SOLVED] P2736 Code: Fix Your Transmission Control Solenoid Valve Now!

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2736 fault code. This code is related to the transmission system and can be caused by a variety of issues such as low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, or a poor electrical connection. It’s important to address this issue promptly as it can lead to further damage to your vehicle’s transmission.

The repair difficulty is moderate, and it’s recommended to visually inspect the related wiring harness and connectors, and check for damaged components. The repair time is estimated at 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2736 fault code. Here are the symptoms to look out for:

  • The P2736 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty starting or may stall while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2736 can be caused by a range of issues, including low transmission fluid level and faulty transmission control solenoid valve.

  • The automobile fault code P2736 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty Transmission Control Solenoid Valve.
  • The Transmission Control Solenoid Valve harness being open or shorted can also cause this fault code.
  • A poor electrical connection in the Transmission Control Solenoid Valve circuit can also be a cause.
  • Lastly, a faulty Transmission Control Module (TCM) can cause the P2736 fault code.

To fix the p2736 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2736, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2736 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosis and fixing the P2736 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time.

The P2736 code is related to the Transmission Control Solenoid Valve 6 Control Circuit O. The Transmission Control Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. The Diagnostic Trouble Code (DTC) is set when the Transmission Control Solenoid Valve Control Circuit commanded state does not match the actual state for greater than 1 s.

What are the possible causes of the P2736 automobile fault code?

If you’re experiencing the P2736 fault code, your engine light may be on. This could be due to a low transmission fluid level, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or a poor electrical connection in the Transmission Control Solenoid Valve circuit. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.

How can I fix the P2736 automobile fault code?

If you’re experiencing the P2736 fault code, your engine light may be on. This could be due to a low transmission fluid level, dirty transmission fluid, or a faulty Transmission Control Solenoid Valve. To fix this issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to troubleshoot the P2736 automobile fault code?

If you’re troubleshooting the P2736 automobile fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The cause could be low or dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or poor electrical connections. To fix the issue, visually inspect the wiring harness and connectors for damage, broken or bent pins, or corrosion. Check the possible causes listed above to determine the root of the problem.

p2736 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the P2736 code, check the transmission fluid level and inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. It could be caused by low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, or a faulty Transmission Control Module (TCM).

Scroll to Top