[SOLVED] P2735 Code: Fixing Intermittent Pressure Control Solenoid ‘f’

The P2735 fault code in automobiles refers to a problem with the line pressure solenoid valve ‘F’ circuit.

This issue can cause the engine light to turn on, indicating a problem with the transmission fluid level or dirty transmission fluid.

The cause of this fault code could be a faulty line pressure solenoid valve ‘F’, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can lead to further damage to the transmission. The repair time for this issue is estimated to be around 1.0 hour. To fix this problem, one should visually inspect the related wiring harness and connectors and check for damaged components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2735 fault code.

Here are the symptoms to look out for:

  • The P2735 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with shifting gears, transmission slippage, and decreased fuel efficiency.
  • Additionally, the vehicle may experience harsh shifting or fail to shift into certain gears.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2735 can be caused by various factors, including low transmission fluid level and faulty line pressure solenoid valve ‘F’.

  • The automobile fault code P2735 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘F’.
  • Additionally, the line pressure solenoid valve ‘F’ harness being open or shorted can cause this fault code.
  • Lastly, a poor electrical connection in the line pressure solenoid valve ‘F’ circuit can also be a cause of the P2735 fault code.

Below are the possible fixes for the automobile fault code p2735, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2735, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2735 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the P2735 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2735 code refers to an issue with the Pressure Control (PC) Solenoid Valve in the transmission system of a vehicle.

The PC Solenoid Valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings.

The P2735 code specifically indicates an intermittent problem with Pressure Control Solenoid ‘F’, which could result in issues with shifting and overall transmission performance.

What are the possible causes of the P2735 automobile fault code?

If you see the engine light on or service engine soon warning light, it could be due to the P2735 fault code. This code is often caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘F’, or a poor electrical connection in the line pressure solenoid valve ‘F’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P2735 automobile fault code?

If you’re experiencing the P2735 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few possible causes to consider. These include low transmission fluid levels, dirty transmission fluid, a faulty line pressure solenoid valve ‘F’, an open or shorted line pressure solenoid valve ‘F’ harness, or a poor electrical connection in the line pressure solenoid valve ‘F’ circuit. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

What should I visually inspect to troubleshoot the P2735 automobile fault code?

If you’re experiencing the P2735 automobile fault code, you may notice that your engine light is on. This could be caused by a low transmission fluid level, dirty transmission fluid, a faulty line pressure solenoid valve ‘F’, an open or shorted line pressure solenoid valve ‘F’ harness, or a poor electrical connection in the line pressure solenoid valve ‘F’ circuit. To troubleshoot this issue, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.

p2735 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the fault code p2735, check the transmission fluid level and condition. Also, inspect the line pressure solenoid valve ‘F’ and its related wiring harness and connectors for any damage or poor electrical connection.

Scroll to Top