[SOLVED] P2729 Code: Low Pressure Control Solenoid ‘e’ – Fix Now!

The P2729 fault code in automobiles refers to a problem with the line pressure solenoid valve ‘E’ circuit.

This issue can cause the engine light to turn on, indicating a problem with the transmission fluid level, dirty transmission fluid, or a faulty solenoid valve. It is important to address this issue promptly as it can lead to further damage to the transmission.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2729 fault code.

Here are the symptoms to look out for:

  • The P2729 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and difficulty shifting gears.
  • Additionally, the vehicle may experience a decrease in power or acceleration, and the transmission may fail to engage or disengage properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P2729 fault code in automobiles can be caused by various factors such as low transmission fluid level, dirty transmission fluid, and faulty line pressure solenoid valve ‘E’.

  • The automobile fault code P2729 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘E’.
  • Additionally, the line pressure solenoid valve ‘E’ harness being open or shorted can cause this fault code.
  • Lastly, a poor electrical connection in the line pressure solenoid valve ‘E’ circuit can also be a cause of the P2729 fault code.

To fix the p2729 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p2729, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2729 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2729 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2729 code refers to a problem with the Pressure Control (PC) Solenoid Valve in the transmission system of a vehicle. The PC Solenoid Valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings.

When the PC Solenoid Valve is not functioning properly, it can cause a decrease in line pressure, resulting in issues with shifting and overall transmission performance.

What are the possible causes of the automobile fault code P2729?

If you see the engine light on or service engine soon warning light, it could be due to the P2729 fault code. This code is usually caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, open or shorted line pressure solenoid valve ‘E’ harness, or poor electrical connection in the line pressure solenoid valve ‘E’ circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

How can I fix the P2729 fault code in my automobile?

If you’re experiencing the P2729 fault code in your automobile, which is indicated by the engine light being on, it could be due to low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, or a poor electrical connection in the line pressure solenoid valve ‘E’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to diagnose the P2729 fault code?

If you’re experiencing the P2729 fault code, indicated by the engine light or service engine soon warning light, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Additionally, check the transmission fluid level and condition, and inspect the line pressure solenoid valve ‘E’ and its circuit for poor electrical connection.

p2729 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, or poor electrical connection.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top