[SOLVED] P2718 Code: Fixing Pressure Control Solenoid ‘d’ Circuit/Open

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2718 fault code. This code indicates a problem with the line pressure solenoid valve ‘D’ in the transmission system.

The possible causes of this fault code include low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, open or shorted harness, or poor electrical connection. It is important to address this issue as soon as possible to avoid further damage to the transmission system.

The repair time for this fault code is estimated at 1.0, and it is recommended to visually inspect the related wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p2718 fault code. Here are the symptoms to look out for:

  • The P2718 fault code in an automobile can cause several symptoms.
  • These include the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms include harsh shifting, delayed shifting, transmission slippage, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty accelerating or may not move at all.
  • It is important to address these symptoms promptly to prevent further damage to the transmission.

The automobile fault code p2718 can be caused by various factors such as low transmission fluid level and faulty line pressure solenoid valve ‘D’.

  • The automobile fault code P2718 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘D’.
  • Additionally, the fault code can be caused by an open or shorted harness of the line pressure solenoid valve ‘D’.
  • Lastly, a poor electrical connection in the circuit of the line pressure solenoid valve ‘D’ can also cause the P2718 fault code.

Below are the possible fixes for the automobile fault code p2718, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code p2718, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2718 relates to the transmission pressure control solenoid. The symptoms include harsh shifting, slipping, and decreased fuel efficiency. The causes can be a faulty solenoid, wiring issues, or low transmission fluid levels.

The estimated repair time for this fault code is 1.0 hour, and the cost can range from $75 to $150 per hour for most auto repair shops. It is important to address this issue promptly to avoid further damage to the transmission and ensure safe driving.

The P2718 code refers to a problem with the Pressure Control (PC) Solenoid Valve in the transmission system of a vehicle.

The PC Solenoid Valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings.

The P2718 code specifically indicates an issue with the control circuit or output of the PC Solenoid Valve ‘D’.

This can cause problems with shifting and overall transmission performance.

What are the possible causes of the P2718 fault code?

If you see the engine light on or service engine soon warning light, it could be due to the P2718 fault code. This code is often caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, or a poor electrical connection in the line pressure solenoid valve ‘D’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P2718 fault code?

If you’re experiencing the P2718 fault code, indicated by the engine light or service engine soon warning light, it could be due to low transmission fluid level, dirty transmission fluid, or a faulty line pressure solenoid valve ‘D’. Check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

What should I visually inspect to troubleshoot the P2718 fault code?

If you’re experiencing the P2718 fault code, indicated by the engine light or service engine soon warning light turning on, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code can be caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, or a poor electrical connection in the line pressure solenoid valve ‘D’ circuit.

p2718 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, check the transmission fluid level and inspect the wiring harness and connectors for any damage. Also, look for broken, bent, pushed out, or corroded connector’s pins. This could be caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, or poor electrical connection in the line pressure solenoid valve ‘D’ circuit.

Scroll to Top