The P2717 fault code in automobiles refers to a problem with the Control Solenoid Valve Assembly in the transmission system. The most common symptom of this issue is the illumination of the Engine Light or Service Engine Soon Warning Light.
The cause of this fault code can be traced back to low transmission fluid levels, dirty transmission fluid, faulty Control Solenoid Valve Assembly, or issues with the assembly’s harness or connectors.
The repair importance of this issue is high as it can lead to further damage to the transmission system.
The difficulty level of the repair is moderate, and the possible fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2717: Transmission Slipping? Here’s What You Need To Know
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2717 fault code. Here are the symptoms to look out for:
- The P2717 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include harsh shifting, delayed shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
- Additionally, the vehicle may experience difficulty accelerating or may not move at all.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2717: Culprits Behind Faulty Transmission Shift Solenoid
P2717 fault code can be caused by various factors such as low transmission fluid level, dirty fluid, and faulty control solenoid valve assembly.
- The automobile fault code P2717 can be caused by a low transmission fluid level.
- It can also be caused by dirty transmission fluid.
- Another cause of this fault code is a faulty Control Solenoid Valve Assembly.
- The Control Solenoid Valve Assembly harness or connectors can also be a cause.
- Additionally, the Control Solenoid Valve Assembly circuit being open or shorted can cause the P2717 fault code.
Fix Code P2717: Simple Steps To Get Your Car Running
To fix the p2717 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2717, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2717: Affordable Fix For Complex Transmission Issue
The automobile fault code P2717 relates to the transmission shift solenoid. The diagnosis involves checking the wiring and connections, as well as testing the solenoid itself. The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this issue can vary depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.
Other factors that may influence the cost include the location of the shop, the type of vehicle, and the availability of parts.
P2717: Transmission Pressure Control Solenoid Failure
The P2717 fault code relates to the pressure control solenoid 4 in the control solenoid valve assembly. This solenoid regulates and directs oil pressure to the 2-6 clutch regulator valve. The Transmission Control Module (TCM) varies the current to the solenoid through a low-side driver.
Increasing the current to the solenoid increases oil pressure by closing off the solenoid exhaust port. Decreasing the current to the solenoid decreases oil pressure by opening the exhaust port.
The high-side driver supplies power to the solenoid and protects the circuit and components from excessive current flow.
FAQ
If you’re experiencing the P2717 fault code, you may notice that your engine light is on. This could be due to a variety of causes, including low transmission fluid levels, dirty transmission fluid, a faulty Control Solenoid Valve Assembly, or issues with the Control Solenoid Valve Assembly harness or connectors. To fix the issue, it’s important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2717 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few possible causes to consider. These include low transmission fluid levels, dirty transmission fluid, a faulty control solenoid valve assembly, or issues with the assembly’s harness or connectors. To fix the problem, start by visually inspecting the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for broken, bent, or pushed out connector pins.
If you’re experiencing the P2717 fault code, start by checking for an illuminated engine light or service engine soon warning light. The issue could be caused by low transmission fluid level, dirty transmission fluid, a faulty Control Solenoid Valve Assembly, or issues with the Control Solenoid Valve Assembly harness or connectors. To troubleshoot, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low transmission fluid level, dirty transmission fluid, faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness or connectors, or Control Solenoid Valve Assembly circuit is open or shorted.
Check the possible causes, visually inspect the related wiring harness and connectors, and look for damaged components and connector’s pins.
