[SOLVED] P2702 Code: Quick Fix For Transmission Friction Element ‘c’

The P2702 automobile fault code indicates a problem with the steering gear internal failure, inner tie rods, contaminated gearrack, damaged steering gear bellows boot, or low tire air pressure. The symptom is an illuminated engine light or service engine soon warning light.

It is important to address this issue promptly as it can affect the vehicle’s steering and handling.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the problem, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2702 fault code.

Here are the symptoms to look out for:

  • The P2702 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty shifting gears or may not shift gears at all.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P2702 fault code in automobiles can be caused by a range of factors, including low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, and steering gear internal failure.

  • The automobile fault code P2702 can be caused by low tire air pressure.
  • It can also be caused by a damaged steering gear bellows boot.
  • Contaminated gear/rack is another cause of this fault code.
  • Inner tie rods can also lead to the P2702 code.
  • Lastly, steering gear internal failure can cause this fault code to appear.

Listed below are possible fixes for the automobile fault code p2702, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2702, you need to check the possible causes listed above.
  • Inspect the wiring harness and connectors visually.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2702 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2702 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2702 fault code is related to the Transmission Friction Element ‘C’ Apply Time RangePerformance. This fault code is monitored by the Power Steering Control Module (PSCM) when the ignition is ON and the voltage supply to the PSCM is above 6 volts.

The PSCM will monitor the amount of force needed to assist with vehicle steering, and all other Electric Power-Assisted Steering (EPAS) sensors are functioning correctly and the EPAS gear is providing assist.

What are the possible causes of the P2702 automobile fault code that triggers the engine light or service engine soon warning light?

If you see the engine light or service engine soon warning light with the P2702 fault code, it could be due to low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, or steering gear internal failure. To fix it, check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2702 automobile fault code?

If you’re experiencing the P2702 automobile fault code, start by checking the “Possible Causes” listed above. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and fix the problem.

What are the potential damages that can occur to the steering gear bellows boot, contaminated gear/rack, and inner tie rods that can cause the P2702 automobile fault code?

The P2702 automobile fault code can be caused by a damaged steering gear bellows boot, contaminated gear/rack, or inner tie rods. Low tire air pressure and steering gear internal failure can also trigger this code. The symptom is an illuminated engine light or service engine soon warning light. To fix the issue, one must visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p2702 error fault code explained

If your engine light is on, it could be due to low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, or steering gear internal failure.

Check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

Scroll to Top