[SOLVED] P26A2 Code: High Exhaust Aftertreatment Glow Plug – Fix Now!

The P26A2 fault code in automobiles indicates a problem with the Exhaust Aftertreatment Glow Plug system. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty Exhaust Aftertreatment Glow Plug, an open or shorted harness, or a poor electrical connection in the circuit.

The importance of repairing this issue lies in the fact that it can lead to reduced engine performance and increased emissions. The repair difficulty is moderate, with a repair time of 1.0. To fix the problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p26a2 fault code.

Here are the symptoms to look out for:

  • The P26A2 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include reduced engine power, engine misfires, poor acceleration, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting or may stall while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P26A2 fault code can be caused by a faulty glow plug, open or shorted harness, or poor electrical connection.

  • The automobile fault code P26A2 can be caused by a faulty Exhaust Aftertreatment Glow Plug.
  • It can also be caused by an open or shorted Exhaust Aftertreatment Glow Plug harness.
  • Additionally, a poor electrical connection in the Exhaust Aftertreatment Glow Plug circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p26a2, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code P26A2, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P26A2 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P26A2 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P26A2 code is related to the Exhaust Aftertreatment Glow Plug Control Circuit. The Powertrain Control Module (PCM) monitors this circuit and sets the OBDII code when it is out of factory specifications. The P26A2 code specifically indicates that the Exhaust Aftertreatment Glow Plug Circuit is high.

This fault code can cause issues with the vehicle’s emissions and may result in decreased performance. It is important to have this issue diagnosed and repaired promptly to avoid further damage to the vehicle.

What are the possible causes of the P26A2 fault code in an automobile?

If you see the engine light on or the service engine soon warning light, it could be due to the P26A2 fault code. This code is usually caused by a faulty exhaust aftertreatment glow plug, an open or shorted exhaust aftertreatment glow plug harness, or a poor electrical connection in the exhaust aftertreatment glow plug circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P26A2 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P26A2 fault code, there are a few things you can do to fix it. Firstly, check for a faulty Exhaust Aftertreatment Glow Plug, an open or shorted Exhaust Aftertreatment Glow Plug harness, or a poor electrical connection in the Exhaust Aftertreatment Glow Plug circuit. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the P26A2 fault code in an automobile?

Ignoring the P26A2 fault code in an automobile, which indicates a faulty Exhaust Aftertreatment Glow Plug, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle may not pass emissions tests. Additionally, the faulty plug can cause damage to the engine and other components, leading to costly repairs. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p26a2 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Exhaust Aftertreatment Glow Plug, open or shorted harness, or poor electrical connection. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top