[SOLVED] P269C Code: Fixing Exhaust Aftertreatment Glow Plug Control Performance

The P269C fault code in automobiles indicates a problem with the Exhaust Aftertreatment Glow Plug.

The most common symptom is the Engine Light turning on. The cause of this issue could be a faulty Exhaust Aftertreatment Glow Plug, an open or shorted harness, or a poor electrical connection in the circuit. It is important to address this issue promptly as it can lead to reduced engine performance and increased emissions.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p269c fault code. Here are the symptoms to look out for:

  • The P269C fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P269C automobile fault code can be caused by a faulty glow plug, open or shorted harness, or poor electrical connection.

  • The automobile fault code P269C can be caused by a faulty Exhaust Aftertreatment Glow Plug.
  • It can also be caused by an open or shorted Exhaust Aftertreatment Glow Plug harness.
  • Additionally, a poor electrical connection in the Exhaust Aftertreatment Glow Plug circuit can also trigger this fault code.

To fix the automobile fault code p269c, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p269c, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P269C can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P269C fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P269C code is related to the Exhaust Aftertreatment Glow Plug Control Circuit.

The Powertrain Control Module (PCM) is responsible for monitoring this circuit.

If the circuit is not within factory specifications, the PCM will set the OBDII code. The code indicates a problem with the performance of the Exhaust Aftertreatment Glow Plug Control Circuit.

What are the possible causes of the P269C automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P269C fault code. This code is usually caused by a faulty exhaust aftertreatment glow plug, an open or shorted exhaust aftertreatment glow plug harness, or a poor electrical connection in the exhaust aftertreatment glow plug circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P269C fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P269C fault code, there are a few things you can do to fix it. Firstly, check for a faulty Exhaust Aftertreatment Glow Plug, an open or shorted Exhaust Aftertreatment Glow Plug harness, or a poor electrical connection in the Exhaust Aftertreatment Glow Plug circuit. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components that one should look for when fixing the P269C fault code?

If you’re dealing with the P269C fault code, keep an eye out for the engine light or service engine soon warning light turning on. The cause of this issue could be a faulty exhaust aftertreatment glow plug, an open or shorted harness, or a poor electrical connection in the exhaust aftertreatment glow plug circuit. To fix the problem, inspect the wiring harness and connectors for any damage, such as broken, bent, pushed out, or corroded pins.

p269c error fault code explained

If your engine light is on, it could be due to a faulty exhaust aftertreatment glow plug, an open or shorted harness, or poor electrical connection.

Check the wiring harness and connectors for damage, broken or corroded pins.

Scroll to Top