[SOLVED] P2694 Code: Fixing Cylinder 9 Injector Compatibility Issue

The P2694 automobile fault code is related to the program injector and can cause a range of symptoms, including engine misfires, rough idling, and decreased fuel efficiency.

The cause of this fault code is typically related to issues with the wiring harness or connectors. It is important to visually inspect these components for any damage or corrosion. The repair time for this issue is estimated at 1.0, and it is crucial to address this issue promptly to avoid further damage to the vehicle.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Here are some symptoms of the automobile fault code p2694:

  • The P2694 fault code in automobiles can cause several symptoms, including engine misfires, rough idling, reduced power, poor acceleration, and increased fuel consumption.
  • Additionally, the check engine light may illuminate, and the vehicle may emit black smoke from the exhaust.
  • It may also experience stalling or hesitation during acceleration, and the transmission may shift roughly or erratically.
  • These symptoms can indicate a problem with the fuel injector control circuit or a malfunctioning fuel injector.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2694 can be caused by various issues related to the program injector. Here are some of the possible causes:

  • The P2694 fault code in automobiles can be caused by a faulty program injector.
  • This can happen due to a malfunctioning fuel injector driver circuit, a damaged fuel injector, or a clogged fuel injector.
  • Other possible causes include a faulty powertrain control module (PCM), a damaged wiring harness, or a malfunctioning fuel pressure regulator.
  • It can also be caused by a vacuum leak, a faulty fuel pump, or a malfunctioning fuel pressure sensor.
  • It is important to diagnose and fix the root cause of the fault code to prevent further damage to the vehicle.

Below are the possible fixes for the automobile fault code p2694, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P2694, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2694 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the P2694 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2694 fault code is related to the transmission control module. It indicates that there is a problem with the pressure control solenoid “B”.

This can cause issues with shifting gears and can lead to transmission damage if left unaddressed.

If you see the engine light or service engine soon warning light come on, it’s important to have your vehicle diagnosed and repaired as soon as possible to avoid further damage. Ignoring this fault code can lead to costly repairs down the line.

What are the possible causes of the P2694 automobile fault code?

The P2694 fault code in automobiles is usually caused by a faulty Program Injector. The symptoms of this fault code are not specified. To fix this issue, one should check the possible causes listed above and visually inspect the related wiring harness and connectors. It is important to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2694 fault code?

To fix the P2694 fault code caused by a program injector, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help identify any issues that may be causing the fault code. Be sure to check the “Possible Causes” listed above for additional troubleshooting steps.

What are the steps to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the P2694 fault code?

To fix the P2694 fault code caused by a program injector, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help identify any damaged components and allow for the necessary repairs to be made.

p2694 error fault code explained

If you encounter the p2694 fault code, it may be caused by a program injector issue. To fix it, inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector’s pins.

Refer to the “Possible Causes” listed above for further guidance.

Scroll to Top