[SOLVED] P2690 Code: Fixing Cylinder 5 Injector Compatibility Issues

The P2690 automobile fault code is related to the program injector and can cause a range of symptoms, including engine misfires, rough idling, and decreased fuel efficiency. The cause of this fault code is typically a malfunctioning program injector. Repairing this issue is important as it can lead to further damage to the engine if left unaddressed.

The repair difficulty is moderate, with a repair time of approximately 1.0 hour.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage or corrosion and check for broken or bent pins. Understanding how to interpret fault codes is crucial for maintaining the health of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Here are some common symptoms of the automobile fault code P2690:

  • The P2690 fault code indicates a problem with the transmission control module.
  • Symptoms of this fault code include harsh shifting, transmission slipping, reduced fuel efficiency, and the check engine light turning on.
  • Other symptoms may include difficulty shifting gears, transmission overheating, and the vehicle going into limp mode.
  • It is important to address this issue promptly to avoid further damage to the transmission.

The automobile fault code P2690 can be caused by various issues related to the program injector.

Here are some of the possible causes:

  • The P2690 fault code in automobiles can be caused by a variety of factors.
  • One of the main causes is a faulty program injector.
  • Other causes may include a malfunctioning fuel pump, a clogged fuel filter, a damaged fuel pressure regulator, a faulty fuel injector driver circuit, or a damaged fuel injector.
  • It can also be caused by a vacuum leak, a damaged or dirty mass airflow sensor, or a malfunctioning oxygen sensor.
  • It is important to diagnose and fix the root cause of the problem to prevent further damage to the vehicle.

Below are the possible fixes for the automobile fault code p2690, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P2690, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2690 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the P2690 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2690 fault code is a common issue that can cause the engine light to turn on. This warning light is also known as the Service Engine Soon Warning Light.

The P2690 code indicates a problem with the transmission control module (TCM) or the engine control module (ECM). This fault code can be caused by a variety of issues, including a faulty TCM or ECM, damaged wiring or connectors, or a malfunctioning transmission solenoid. It is important to have this issue diagnosed and repaired as soon as possible to prevent further damage to your vehicle.

What are the possible causes of the P2690 automobile fault code?

The P2690 fault code in automobiles is caused by a program injector issue. The symptoms of this fault code are not specified. To fix this issue, one should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2690 fault code?

To fix the P2690 fault code caused by a faulty Program Injector, one should visually inspect the related wiring harness and connectors. This involves checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins. It is important to thoroughly examine the wiring harness and connectors to ensure that all potential issues are identified and addressed.

What are the steps to take if one finds damaged components or broken, bent, pushed out, or corroded connector’s pins while fixing the P2690 fault code?

If you encounter damaged components or broken, bent, pushed out, or corroded connector’s pins while fixing the P2690 fault code, follow these steps: Check the “Possible Causes” listed above, visually inspect the related wiring harness and connectors, and look for damaged components. Then, check for broken, bent, pushed out, or corroded connector’s pins. If you find any of these issues, replace or repair the damaged components or pins to fix the issue.

p2690 error fault code explained

If you’re experiencing the p2690 fault code, it may be caused by a program injector issue. To fix it, check the possible causes listed above, inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

Scroll to Top