[SOLVED] P2680 Code: Fix High Coolant Degassing Valve Control Circuit

The P2680 fault code in automobiles indicates a problem with the Coolant Degassing Valve.

The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this issue could be a faulty valve, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to engine overheating and damage.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, one must check the possible causes listed above and inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2680 fault code.

Here are the symptoms to look out for:

  • The P2680 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code P2680 can be caused by a faulty valve, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2680 can be caused by a faulty Coolant Degassing Valve.
  • It can also be caused by an open or shorted Coolant Degassing Valve harness.
  • Additionally, a poor electrical connection in the Coolant Degassing Valve circuit can also trigger this fault code.

To fix the p2680 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P2680, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2680 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2680 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2680 code is related to the Coolant Degassing Valve Control Circuit.

The Powertrain Control Module (PCM) is responsible for monitoring this circuit. If the PCM detects that the Coolant Degassing Valve Control Circuit is out of factory specifications, it will set the P2680 code.

This code specifically indicates that the Coolant Degassing Valve Control Circuit is high.

What are the possible causes of the P2680 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2680 fault code. This code is usually caused by a faulty coolant degassing valve, an open or shorted harness, or a poor electrical connection in the coolant degassing valve circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2680 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2680 fault code, you may need to visually inspect the related wiring harness and connectors. This is because the cause of the issue could be a faulty Coolant Degassing Valve, an open or shorted Coolant Degassing Valve harness, or a poor electrical connection in the Coolant Degassing Valve circuit. To fix the problem, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P2680 fault code?

If you’re fixing the P2680 fault code, look out for the Engine Light ON or Service Engine Soon Warning Light. The possible causes include a faulty Coolant Degassing Valve, an open or shorted Coolant Degassing Valve harness, or a poor electrical connection in the Coolant Degassing Valve circuit. To fix it, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

p2680 error fault code explained

If your engine light is on, it could be due to a faulty coolant degassing valve, open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage, broken or corroded pins.

Check the possible causes listed above to fix the issue.

Scroll to Top