[SOLVED] P267E Code: Fixing Intermittent Rocker Arm Sensor Circuit Issues

The P267E fault code in automobiles refers to a problem with the ‘B’ Rocker Arm Actuator Sensor. The most common symptom of this issue is the Engine Light turning on. The cause of this problem can be low or overfilled engine oil, incorrect engine oil type, faulty sensor, or poor electrical connection.

It is important to address this issue promptly as it can lead to engine damage. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p267e fault code. Here are the symptoms to look out for:

  • The P267E fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P267E automobile fault code can be caused by various factors, including low or overfilled engine oil, incorrect oil type, and faulty sensors.

  • The automobile fault code P267E can be caused by low or overfilled engine oil.
  • It can also be caused by using the incorrect engine oil type.
  • Another possible cause is a faulty ‘B’ Rocker Arm Actuator Sensor.
  • The ‘B’ Rocker Arm Actuator Sensor harness being open or shorted can also trigger this fault code.
  • Lastly, a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit can cause the P267E fault code to appear.

To fix the p267e automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code p267e, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P267E has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P267E will range between $75 and $150, depending on the repair time required.

The P267E code is related to the engine’s variable valve timing system.

The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit. The ‘B’ Rocker Arm Actuator Position Sensor signal is monitored by the ECM.

If the signal is out of factory specifications, the ECM sets the OBDII and triggers the P267E code.

This code indicates an intermittent or erratic circuit issue with the ‘B’ Rocker Arm Actuator Position Sensor on the bank.

What are the possible causes of the P267E fault code?

If you’re experiencing the P267E fault code, your engine light may be on. This could be due to low or overfilled engine oil, incorrect engine oil type, a faulty ‘B’ Rocker Arm Actuator Sensor, or a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit. To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

How can I fix the P267E fault code?

If you’re experiencing the P267E fault code, indicated by the engine light or service engine soon warning light, it could be due to low or overfilled engine oil, incorrect oil type, faulty ‘B’ Rocker Arm Actuator Sensor, or poor electrical connection in the sensor circuit. To fix it, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

What should I visually inspect to troubleshoot the P267E fault code?

If you’re troubleshooting the P267E fault code, start by checking for an illuminated engine light or service engine soon warning light. The cause could be low or overfilled engine oil, incorrect engine oil type, a faulty ‘B’ Rocker Arm Actuator Sensor, an open or shorted ‘B’ Rocker Arm Actuator Sensor harness, or a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit. To fix the issue, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.

p267e error fault code explained

If your engine light is on, it could be due to low or overfilled engine oil, incorrect oil type, or a faulty ‘B’ Rocker Arm Actuator Sensor. Check for these issues and inspect the wiring harness and connectors for damage.

Look for broken, bent, pushed out, or corroded connector pins.

Scroll to Top