[SOLVED] P267B Code: Fixing Rocker Arm Sensor Circuit Range/Performance Issue

The P267B fault code in automobiles refers to a problem with the ‘B’ Rocker Arm Actuator Sensor. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this issue could be low or overfilled engine oil, incorrect engine oil type, faulty sensor, or poor electrical connection. The repair importance is high as it can lead to engine damage if left unaddressed.

The difficulty level of repair is moderate, and it takes around 1.0 hour to fix. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p267b fault code.

Here are the symptoms to look out for:

  • The P267B fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P267B fault code in automobiles can be caused by various factors such as low engine oil, faulty sensors, and poor electrical connections.

  • The automobile fault code P267B can be caused by low or overfilled engine oil.
  • It can also be caused by using the incorrect engine oil type.
  • Another possible cause is a faulty ‘B’ Rocker Arm Actuator Sensor.
  • The ‘B’ Rocker Arm Actuator Sensor harness being open or shorted can also trigger this fault code.
  • Lastly, a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit can cause the P267B fault code to appear.

To fix the automobile fault code p267b, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p267b, you need to check the possible causes listed above.
  • Inspect the wiring harness and connectors visually.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This repair will take an estimated time of 1.0 hour.

The automobile fault code P267B can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the P267B fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P267B code is related to the engine’s variable valve timing system.

The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit. The ‘B’ Rocker Arm Actuator Position Sensor signal is monitored by the ECM.

If the signal is out of factory specifications, the ECM sets the OBDII and triggers the P267B code. This code indicates a circuit rangeperformance issue with the ‘B’ Rocker Arm Actuator Position Sensor.

What are the possible causes of the P267B fault code?

If you’re experiencing the P267B fault code, your engine light may be on. This could be due to low or overfilled engine oil, incorrect engine oil type, a faulty ‘B’ Rocker Arm Actuator Sensor, an open or shorted ‘B’ Rocker Arm Actuator Sensor harness, or a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit. To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or connector pins that are broken, bent, pushed out, or corroded.

How can I fix the P267B fault code?

If you’re experiencing the P267B fault code, indicated by the engine light or service engine soon warning light, it could be due to low or overfilled engine oil, incorrect oil type, faulty ‘B’ Rocker Arm Actuator Sensor, or poor electrical connection. To fix it, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

What should I visually inspect to troubleshoot the P267B fault code?

If you’re experiencing the P267B fault code, indicated by the engine light or service engine soon warning light turning on, there are a few things you can visually inspect to troubleshoot the issue. This fault code can be caused by low or overfilled engine oil, incorrect engine oil type, a faulty ‘B’ Rocker Arm Actuator Sensor, an open or shorted ‘B’ Rocker Arm Actuator Sensor harness, or a poor electrical connection in the ‘B’ Rocker Arm Actuator Sensor circuit. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or broken, bent, pushed out, or corroded connector pins.

p267b error fault code explained

If your engine light is on, it could be due to low or overfilled engine oil, incorrect oil type, or a faulty ‘B’ Rocker Arm Actuator Sensor. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top