[SOLVED] P2678 Code: Fix Coolant Degassing Valve Control Circuit/Open

The P2678 fault code in automobiles indicates a problem with the Coolant Degassing Valve. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this issue could be a faulty valve, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to engine overheating and damage. The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion.

The difficulty level of this repair is moderate, and it can take up to 1.0 hour to fix.

To interpret the fault code, one needs to use an OBD-II scanner or code reader.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2678 fault code.

Here are the symptoms to look out for:

  • The P2678 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, poor acceleration, and rough idling.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2678 can be caused by a faulty valve, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2678 can be caused by a faulty coolant degassing valve.
  • It can also be caused by an open or shorted harness of the coolant degassing valve.
  • Additionally, a poor electrical connection in the coolant degassing valve circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2678, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P2678, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2678 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2678 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2678 code is related to the Coolant Degassing Valve Control CircuitO. The Powertrain Control Module (PCM) is responsible for monitoring this circuit.

If the PCM detects that the Coolant Degassing Valve Control Circuit is not within factory specifications, it will set the P2678 code.

This fault code indicates that there is an issue with the Coolant Degassing Valve Control Circuit. It is important to address this issue promptly to prevent further damage to the vehicle.

What are the possible causes of the P2678 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2678 fault code. This code is usually caused by a faulty coolant degassing valve, an open or shorted harness, or a poor electrical connection in the coolant degassing valve circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2678 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2678 fault code, you may need to visually inspect the related wiring harness and connectors. This is because the cause of the issue could be a faulty Coolant Degassing Valve, an open or shorted Coolant Degassing Valve harness, or a poor electrical connection in the Coolant Degassing Valve circuit. To fix the problem, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P2678 fault code?

If you’re fixing the P2678 fault code, look out for the engine light or service engine soon warning light. The possible causes include a faulty coolant degassing valve, an open or shorted coolant degassing valve harness, or a poor electrical connection in the coolant degassing valve circuit. To fix it, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

p2678 error fault code explained

If your engine light is on, it could be due to a faulty coolant degassing valve, open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage, broken or corroded pins, and other issues.

Check the possible causes listed above to fix the problem.

Scroll to Top