The P2672 fault code in automobiles indicates a problem with the injection pump.
The most common symptom is the illumination of the engine light or service engine soon warning light.
The cause of this fault code could be a faulty injection pump, an open or shorted injection pump harness, or a poor electrical connection in the injection pump circuit. It is important to address this issue promptly as it can lead to reduced engine performance and fuel efficiency.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.
The repair time for this fault code is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2672: Unresponsive Acceleration – Symptoms & Solutions
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2672 fault code. Here are the symptoms to look out for:
- The P2672 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include a decrease in engine power, poor acceleration, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P2672: Common Culprits
The automobile fault code P2672 can be caused by a faulty injection pump, open or shorted injection pump harness, or poor electrical connection in the injection pump circuit.
- The automobile fault code P2672 can be caused by a faulty injection pump.
- It can also be caused by an open or shorted injection pump harness.
- Additionally, a poor electrical connection in the injection pump circuit can also trigger this fault code.
Fix Code P2672: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p2672, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P2672, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2672: Affordable Fix For Your Car’s Performance Woes
The fault code is P2672.
The estimated repair time is 1.0 hour. The cost of fixing the fault code depends on the repair time. Most auto repair shops charge between $75 and $150 per hour.
Therefore, the fixing cost of P2672 will be between $75 and $150.
P2672: Your Engine’s Power Reduced – Here’s Why
The P2672 code is related to the Injection Pump Timing.
The Powertrain Control Module (PCM) monitors this timing.
If the timing is not within factory specifications, the PCM sets the OBDII code. The code indicates that the Injection Pump Timing is off.
FAQ
If you see the engine light on with the fault code P2672, it could be due to a faulty injection pump, an open or shorted injection pump harness, or a poor electrical connection in the injection pump circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2672 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Injection Pump, an open or shorted Injection Pump harness, or a poor electrical connection in the Injection Pump circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If you encounter damaged components or broken, bent, pushed out, or corroded connector’s pins while fixing the P2672 fault code, follow these steps. First, visually inspect the related wiring harness and connectors. Second, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Finally, replace or repair any damaged components or connector pins to fix the issue.
Wrap Up
If your engine light is on, it could be due to a faulty injection pump, open or shorted injection pump harness, or poor electrical connection.
Visually inspect the wiring harness and connectors for damage or corrosion.
Check for broken, bent, or pushed out connector pins.
