[SOLVED] P2665 Code: Fix Fuel Shutoff Valve ‘b’ Control Circuit/Open

The P2665 fault code in automobiles indicates a problem with the Fuel Shutoff Valve ‘B’.

The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty Fuel Shutoff Valve ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. It is important to address this issue promptly as it can lead to decreased fuel efficiency and engine performance.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, read on to learn about the symptoms of the p2665 automobile fault code.

  • The P2665 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, reduced fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P2665 fault code can be caused by a faulty fuel shutoff valve ‘B’, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2665 can be caused by a faulty Fuel Shutoff Valve ‘B’.
  • It can also be caused by an open or shorted Fuel Shutoff Valve ‘B’ harness.
  • Additionally, a poor electrical connection in the Fuel Shutoff Valve ‘B’ circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2665, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2665, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • Ensure that everything is in good condition.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code P2665 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of fixing the P2665 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2665 code is related to the Fuel Shutoff Valve ‘B’ Control CircuitO. The Engine Control Module (ECM) is responsible for monitoring this circuit. If the Fuel Shutoff Valve ‘B’ Control Circuit is not within the factory specifications, the ECM will set the OBDII code.

This fault code can indicate a problem with the fuel shutoff valve or the wiring and connections associated with it. It is important to address this issue promptly to prevent further damage to the vehicle and ensure proper functioning of the fuel system.

What are the possible causes of the P2665 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2665 fault code. This code is caused by a faulty fuel shutoff valve ‘B’, an open or shorted fuel shutoff valve ‘B’ harness, or a poor electrical connection in the fuel shutoff valve ‘B’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2665 fault code?

If you’re experiencing the P2665 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Fuel Shutoff Valve ‘B’, an open or shorted Fuel Shutoff Valve ‘B’ harness, or a poor electrical connection in the Fuel Shutoff Valve ‘B’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs that the Fuel Shutoff Valve ‘B’ harness is open or shorted, causing the P2665 fault code?

If the Fuel Shutoff Valve ‘B’ harness is open or shorted, it can cause the P2665 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p2665 error fault code explained

If your engine light is on, it could be due to a faulty Fuel Shutoff Valve ‘B’, an open or shorted harness, or poor electrical connection.

Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins.

Scroll to Top