[SOLVED] P2658 Code: Low Voltage In Rocker Arm Solenoid – Fix Now!

The P2658 fault code in automobiles refers to a problem with the ‘A’ Rocker Arm Actuator circuit. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection in the circuit.

The repair importance is high as it can lead to engine damage if left unaddressed. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.

To interpret the fault code, one needs to use an OBD-II scanner or code reader.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p2658 fault code.

Here are the symptoms to look out for:

  • The P2658 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, reduced fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and the transmission may shift poorly or not at all.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2658 can be caused by a variety of factors, including low or overfilled engine oil, incorrect oil type, and faulty actuator components.

  • The automobile fault code P2658 can be caused by low or overfilled engine oil.
  • It can also be caused by using an incorrect engine oil type.
  • Another possible cause is a faulty ‘A’ Rocker Arm Actuator.
  • The ‘A’ Rocker Arm Actuator harness being open or shorted can also trigger this fault code.
  • Lastly, a poor electrical connection in the ‘A’ Rocker Arm Actuator circuit can cause the P2658 fault code to appear.

To fix the p2658 automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code p2658, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • Ensure that everything is in good condition.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code P2658 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of fixing the P2658 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2658 code is related to the Rocker Arm Oil Control Solenoid ‘A’ Circuit.

The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit. The Rocker Arm Actuator adjusts the engine’s valve timing through the variable valve timing (VVT) system. The ECM monitors the Rocker Arm Actuator circuit and sets the OBDII when the ‘A’ Rocker Arm Actuator circuit is out of factory specifications.

The P2658 code indicates that the ‘A’ Rocker Arm Actuator circuit is experiencing low voltage bank.

What are the possible causes of the automobile fault code P2658?

If you see the engine light on or service engine soon warning light, it could be due to the P2658 fault code. This code can be caused by low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, ‘A’ Rocker Arm Actuator harness being open or shorted, or poor electrical connection in the ‘A’ Rocker Arm Actuator circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P2658 fault code in my car?

If you’re experiencing the P2658 fault code in your car, which is indicated by the engine light being on, it could be due to low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection in the ‘A’ Rocker Arm Actuator circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Is it safe to drive with the engine light ON due to the P2658 fault code?

It is not safe to drive with the engine light ON due to the P2658 fault code. The cause of this fault code could be low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. It is recommended to address this issue as soon as possible to avoid any further damage to the engine.

p2658 error fault code explained

If you see the Engine Light ON, it could be due to low or overfilled engine oil, incorrect oil type, faulty ‘A’ Rocker Arm Actuator, or poor electrical connection.

Check the possible causes, inspect wiring harness and connectors, and look for damaged components.

Scroll to Top