[SOLVED] P264E Code: Fixing Intermittent Rocker Arm Sensor Circuit Issues

The P264E automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light.

This fault code is caused by low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator Sensor, or poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit.

The importance of repairing this issue lies in the fact that it can lead to engine damage if left unaddressed. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p264e fault code. Here are the symptoms to look out for:

  • The P264E fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel economy, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p264e can be caused by various factors, including low or overfilled engine oil, incorrect oil type, and faulty sensors.

  • The automobile fault code P264E can be caused by low or overfilled engine oil.
  • It can also be caused by using the incorrect engine oil type.
  • Another cause of this fault code is a faulty ‘A’ Rocker Arm Actuator Sensor.
  • An open or shorted ‘A’ Rocker Arm Actuator Sensor harness can also trigger this fault code.
  • Lastly, a poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit can cause the P264E fault code to appear.

Below are the possible fixes for the automobile fault code p264e, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p264e, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P264E has an estimated repair time of 1.0 hour. The cost of fixing this fault code varies between $75 and $150 per hour, depending on the auto repair shop.

The cost may also vary based on the severity of the issue and the type of vehicle. It is important to note that the cost of fixing this fault code may increase if additional repairs are needed.

The P264E code is related to the engine’s variable valve timing system.

The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit.

The ‘A’ Rocker Arm Actuator Position Sensor signal is monitored by the ECM.

If the signal is out of factory specifications, the ECM sets the OBDII and triggers the P264E code. This code indicates an intermittent or erratic circuit issue with the ‘A’ Rocker Arm Actuator Position Sensor on Bank 1. The variable valve timing system is used to improve engine performance, fuel economy, or emissions.

What are the possible causes of the P264E fault code?

If you’re experiencing the P264E fault code, your engine light may be on. This could be due to low or overfilled engine oil, incorrect engine oil type, a faulty ‘A’ Rocker Arm Actuator Sensor, an open or shorted ‘A’ Rocker Arm Actuator Sensor harness, or a poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit. To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or connector pins that are broken, bent, pushed out, or corroded.

How can I fix the P264E fault code?

If you’re experiencing the P264E fault code, which is indicated by the engine light being on, you may be able to fix it by checking for low or overfilled engine oil, incorrect engine oil type, a faulty ‘A’ Rocker Arm Actuator Sensor, an open or shorted ‘A’ Rocker Arm Actuator Sensor harness, or a poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit. To fix the issue, inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Is it safe to continue driving with the P264E fault code?

If you have the P264E fault code, it is not safe to continue driving your vehicle. The engine light or service engine soon warning light will be on, indicating a problem with the ‘A’ Rocker Arm Actuator Sensor. The cause could be low or overfilled engine oil, incorrect engine oil type, or a faulty sensor or wiring. To fix the issue, visually inspect the wiring harness and connectors, and check for damaged components or corroded pins. It’s important to address this issue promptly to avoid further damage to your vehicle.

p264e error fault code explained

If you see the Engine Light ON (or Service Engine Soon Warning Light) due to the p264e fault code, check for low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator Sensor, or poor electrical connection.

Visually inspect the related wiring harness and connectors for any damage or corrosion.

Scroll to Top