[SOLVED] P264D Code: How To Fix High Circuit Position Sensor?

The automobile fault code P264D indicates a problem with the ‘A’ Rocker Arm Actuator Sensor circuit, which can cause the engine light to turn on. This fault code can be caused by low or overfilled engine oil, incorrect engine oil type, or a faulty sensor or wiring. It is important to address this issue promptly as it can lead to engine damage.

The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

To interpret the fault code, it is recommended to check the possible causes listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p264d fault code. Here are the symptoms to look out for:

  • The P264D fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p264d can be caused by various factors, including low or overfilled engine oil, incorrect oil type, and faulty sensors.

  • The automobile fault code P264D can be caused by low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator Sensor, an open or shorted ‘A’ Rocker Arm Actuator Sensor harness, and poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit.

To fix the automobile fault code p264d, check the possible causes and inspect related components for any damage or corrosion.

  • To fix the automobile fault code p264d, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P264D can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of fixing the P264D fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P264D code is related to the engine’s variable valve timing system.

The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit. The ‘A’ Rocker Arm Actuator Position Sensor signal is monitored by the ECM. If the signal is out of factory specifications, the ECM sets the OBDII and triggers the P264D code.

This code indicates that there is a circuit high issue with the ‘A’ Rocker Arm Actuator Position Sensor in Bank 1.

What are the possible causes of the P264D fault code?

If you see the engine light on or service engine soon warning light, it could be due to the P264D fault code. This code can be caused by low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator Sensor, ‘A’ Rocker Arm Actuator Sensor harness that is open or shorted, or a poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the ‘A’ Rocker Arm Actuator Sensor?

If you’re experiencing an Engine Light ON (or Service Engine Soon Warning Light) due to a faulty ‘A’ Rocker Arm Actuator Sensor, you can visually inspect the related wiring harness and connectors to fix the issue. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Also, make sure to check the possible causes listed above, including low or overfilled engine oil, incorrect engine oil type, and poor electrical connection in the ‘A’ Rocker Arm Actuator Sensor circuit.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection, it could be the cause of the engine light being ON. To fix this issue, check the “Possible Causes” listed above and visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. It is important to ensure that the ‘A’ Rocker Arm Actuator Sensor harness is not open or shorted and that the circuit has a good electrical connection.

p264d error fault code explained

If you see the Engine Light ON (or Service Engine Soon Warning Light) due to the p264d fault code, check for low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator Sensor, or poor electrical connection.

Visually inspect the related wiring harness and connectors for any damage or corrosion.

Scroll to Top