[SOLVED] P2644 Code: How To Fix High Torque Feedback Signal ‘b’

The P2644 automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light.

This code is caused by a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or poor electrical connection in the ECM circuit.

The importance of repairing this issue lies in the fact that it can lead to serious engine problems if left unattended.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion.

The fault code can be interpreted by checking the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p2644 fault code.

Here are the symptoms to look out for:

  • The P2644 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, rough idling, stalling, or difficulty starting the engine.
  • The vehicle may also experience poor acceleration or a decrease in fuel efficiency.
  • Additionally, the driver may notice a decrease in overall performance or a lack of response from the engine.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2644 can be caused by various factors, including faulty modules, software updates, and poor electrical connections.

  • The automobile fault code P2644 can be caused by a faulty Engine Control Module (ECM).
  • It can also be caused by a faulty Transmission Control Module (TCM).
  • Another cause of this fault code is an outdated Engine Control Module (ECM) software or Transmission Control Module (TCM) software.
  • An open or shorted Engine Control Module (ECM) harness can also cause this fault code.
  • Lastly, a poor electrical connection in the Engine Control Module (ECM) circuit can also be a cause of the P2644 fault code.

Below are the possible fixes for the automobile fault code p2644, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code p2644, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2644 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the P2644 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2644 code is related to the transmission control module (TCM) and engine control module (ECM) communication.

The ECM may reduce engine torque during shift events to improve shift feel. If the ECM is unable to comply with the request, it sends a message to the TCM that the request has failed, resulting in the P2644 code. This code indicates a torque management feedback signal ‘B’ high.

A fault in the controller area network (CAN) will not cause this code to set.

What are the possible causes of the automobile fault code P2644?

If you see the engine light on or service engine soon warning light, it could be due to the P2644 fault code. This code can be caused by a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or poor electrical connection in the ECM circuit. It can also be caused by outdated software in the ECM or TCM. To fix this issue, you should visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

How can I fix the P2644 fault code in my automobile?

If you’re experiencing the P2644 fault code in your automobile, indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few possible causes. These include a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

What should I visually inspect to troubleshoot the P2644 fault code?

If you’re troubleshooting the P2644 fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The possible causes include a faulty Engine Control Module (ECM) or Transmission Control Module (TCM), outdated software, or poor electrical connections. To fix the issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

p2644 error fault code explained

If your engine light is on, it could be due to a faulty Engine Control Module (ECM) or Transmission Control Module (TCM), or issues with their software or electrical connections.

Visually inspect the wiring harness and connectors for damage, and check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top