[SOLVED] P2640 Code: How To Fix High Torque Feedback Signal

The P2640 automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light.

This code is caused by a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or poor electrical connection in the ECM circuit. The importance of repairing this issue lies in the fact that it can lead to poor engine performance and reduced fuel efficiency.

The repair difficulty is moderate, with a repair time of 1.0.

To fix this issue, one should visually inspect the related wiring harness and connectors and check for damaged components.

It is essential to interpret the fault code correctly to identify the root cause of the problem.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p2640 fault code. Here are the symptoms to look out for:

  • The P2640 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, rough idling, stalling, or difficulty starting the engine.
  • The vehicle may also experience poor acceleration or reduced fuel efficiency.
  • Additionally, the driver may notice a decrease in overall performance or a lack of response from the throttle.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2640 can be caused by various factors, including faulty modules and poor electrical connections.

  • The automobile fault code P2640 can be caused by a faulty Engine Control Module (ECM).
  • It can also be caused by a faulty Transmission Control Module (TCM).
  • Another cause of this fault code is an outdated Engine Control Module (ECM) software or Transmission Control Module (TCM) software.
  • An open or shorted Engine Control Module (ECM) harness can also cause this fault code.
  • Lastly, a poor electrical connection in the Engine Control Module (ECM) circuit can also be a cause of the P2640 fault code.

Below are the possible fixes for the automobile fault code p2640, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code p2640, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2640 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosing and fixing the P2640 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2640 code is related to the transmission control module (TCM) and engine control module (ECM) communication. The TCM may request the ECM to reduce engine torque during shift events to improve shift feel. If the ECM is unable to comply with the request, it sends a message to the TCM that the request has failed, and the P2640 code is set.

This code indicates a torque management feedback signal ‘A’ high fault.

What are the possible causes of the automobile fault code P2640?

If you see the engine light on or service engine soon warning light, it could be due to the P2640 fault code. This code can be caused by a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or poor electrical connection in the ECM circuit. It can also be caused by outdated software in the ECM or TCM. To fix this issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damage or corrosion.

How can I fix the P2640 fault code in my automobile?

If you’re experiencing the P2640 fault code in your automobile, with the engine light on, it could be due to a faulty Engine Control Module (ECM) or Transmission Control Module (TCM), or a poor electrical connection. To fix it, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

What should I visually inspect to troubleshoot the P2640 fault code?

If you’re troubleshooting the P2640 fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The possible causes include a faulty Engine Control Module (ECM), Transmission Control Module (TCM), or software updates for either module. Additionally, the ECM harness may be open or shorted, or there may be a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for damage, broken components, and corroded pins.

p2640 error fault code explained

If your engine light is on, it could be due to a faulty Engine Control Module (ECM) or Transmission Control Module (TCM), or issues with their software or electrical connections.

Visually inspect the wiring harness and connectors for damage, and check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top