[SOLVED] P2625 Code: High Injector Control Pressure – Fix Now!

The P2625 fault code in automobiles indicates a problem with the Injector Control Pressure Regulator. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty Injector Control Pressure Regulator, an open or shorted Injector Control Pressure Regulator harness, or a poor electrical connection in the Injector Control Pressure Regulator circuit.

The repair importance is high as it affects the engine’s performance. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

It is essential to check the possible causes listed above to interpret the fault code correctly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2625 fault code.

Here are the symptoms to look out for:

  • The P2625 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience misfires, hesitation, or surging while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p2625 can be caused by a faulty regulator, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2625 can be caused by a faulty Injector Control Pressure Regulator.
  • It can also be caused by an open or shorted Injector Control Pressure Regulator harness.
  • Additionally, a poor electrical connection in the Injector Control Pressure Regulator circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2625, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2625, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2625 indicates a problem with the upstream oxygen sensor’s heater circuit in the engine bank 1. The estimated repair time for this issue is 1.0 hour.

The cost of fixing this fault code varies depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour. Therefore, the total cost of fixing the P2625 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time.

The P2625 code is related to the Injector Control Pressure Regulator (ICPR) Circuit.

The Powertrain Control Module (PCM) is responsible for monitoring this circuit.

If the ICPR circuit is not within the factory specifications, the PCM will set the OBDII code. The P2625 code specifically indicates that the Injector Control Pressure Regulator Circuit is high. This means that the circuit is operating at a higher level than what is considered normal or acceptable.

This can cause issues with the fuel system and may result in poor engine performance. If you receive the P2625 code, it is important to have your vehicle inspected by a qualified mechanic.

They will be able to diagnose the issue and make any necessary repairs to ensure that your vehicle is running smoothly and efficiently.

What are the possible causes of the P2625 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2625 fault code. This code is caused by a faulty injector control pressure regulator, an open or shorted harness, or a poor electrical connection in the regulator circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the related wiring harness and connectors to fix the P2625 fault code?

If you’re experiencing the P2625 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Injector Control Pressure Regulator or an open or shorted Injector Control Pressure Regulator harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P2625 fault code?

If you’re fixing the P2625 fault code, look out for the Engine Light ON or Service Engine Soon Warning Light. The possible causes include a faulty Injector Control Pressure Regulator, an open or shorted Injector Control Pressure Regulator harness, or a poor electrical connection in the Injector Control Pressure Regulator circuit. To fix it, visually inspect the related wiring harness and connectors, and check for damaged components or broken, bent, pushed out, or corroded connector’s pins.

p2625 error fault code explained

If your engine light is on, it could be due to a faulty Injector Control Pressure Regulator or related wiring issues. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.

Scroll to Top