[SOLVED] P1B17 Code: Low Voltage In Hybrid/Electric Vehicle Battery – Fix Now!

The P1B17 fault code in automobiles indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.

The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue is often a faulty battery pack or control module.

Repairing this problem is important as it can affect the performance of the vehicle.

The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.

To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b17 fault code. Here are the symptoms to look out for:

  • The P1B17 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

P1B17 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B17 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1B17 fault code.

Below are some possible fixes for the automobile fault code p1b17, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1B17, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage or corrosion.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1B17 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing of the P1B17 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P1B17 code indicates a low voltage in the 27th circuit of the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and series.

The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybridEV battery interface control modules. The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information. The battery energy control module will determine when a fault condition is present and communicate it to the hybridEV powertrain control module 2.

What are the possible causes of the P1B17 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1B17 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1B17 fault code?

If you’re experiencing the P1B17 fault code, which is indicated by the engine light or service engine soon warning light turning on, you may have a faulty hybrid/electric vehicle battery pack or interface control module. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the consequences of ignoring the P1B17 fault code and not fixing it in time?

Ignoring the P1B17 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s battery system. This can result in reduced fuel efficiency, decreased power, and even complete failure of the battery system. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p1b17 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module.

Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins. Inspect the components listed above to fix the issue.

Scroll to Top