The P1A76 automobile fault code indicates a problem with the StarterGenerator Control Module (SGCM) in the vehicle. This can cause the engine light to turn on, indicating a need for service.
The cause of this issue could be a faulty SGCM, an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1A76: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of the p1a76 fault code. Here are the symptoms to look out for:
- The P1A76 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1A76: Common Causes Of Fault Code
The P1A76 fault code in automobiles can be caused by various factors, including a faulty SGCM, open or shorted SGCM harness, and poor electrical connection in the SGCM circuit.
- The automobile fault code P1A76 can be caused by a faulty Starter/Generator Control Module (SGCM).
- It can also be caused by an open or shorted SGCM harness.
- Additionally, a poor electrical connection in the SGCM circuit can also trigger this fault code.
Fix Code P1A76: Simple Steps To Get Your Car Running
To fix the p1a76 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code P1A76, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1A76 Repair Cost & Complexity
The automobile fault code P1A76 has an estimated repair time of 1.0 hour. The cost of fixing this fault code varies depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.
These factors are influential in determining the overall cost of diagnosing and fixing the P1A76 fault code.
P1A76: Your Car’s Battery Is In Trouble
The P1A76 code is related to the StarterGenerator Control Module (SGCM) in automobiles. The SGCM monitors its internal fluid temperature sensors to control the SGCM coolant pump and SGCM cooling fan. The code indicates that there is a low voltage in the StarterGenerator Control Module Coolant Temperature Sensor 2 Circuit.
The internal fluid temperature sensors of the SGCM are thermistors and are not serviceable. The resistances of the sensors are high when the internal fluid temperatures are cold and low when they are hot. The input parameters are not displayed on the scan tool.
FAQ
If you see the engine light on or the service engine soon warning light in your automobile, it could be due to the P1A76 fault code. This code is caused by a faulty Starter/Generator Control Module (SGCM), an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If the engine light is on due to a faulty Starter/Generator Control Module (SGCM), it is important to visually inspect the related wiring harness and connectors. Check for any damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This could be caused by an open or shorted SGCM harness or a poor electrical connection in the SGCM circuit. To fix the issue, check the possible causes listed above and address any issues found during the visual inspection.
Ignoring the P1A76 fault code in an automobile, which indicates a faulty Starter/Generator Control Module (SGCM), can lead to serious consequences. The engine light will remain on, and the vehicle may not start or may stall while driving. It is crucial to inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins to fix the issue.
Wrap Up
If your engine light is on, it could be due to a faulty StarterGenerator Control Module (SGCM), an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit.
To fix the issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
