The automobile fault code P1825 indicates a problem with the Internal Mode Switch. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing.
The cause of this fault code could be a faulty Internal Mode Switch, an open or shorted harness, or a poor electrical connection in the Internal Mode Switch circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector pins.
The repair time for this fault code is estimated to be 1.0.
To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P1825
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1825 fault code.
- The symptoms of the automobile fault code P1825 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1825?
The automobile fault code P1825 can be caused by a faulty internal mode switch, an open or shorted internal mode switch harness, or a poor electrical connection in the internal mode switch circuit.
- The fault code P1825 can be caused by the following: a faulty Internal Mode Switch, an open or shorted Internal Mode Switch harness, and a poor electrical connection in the Internal Mode Switch circuit.
Fixing Code P1825: Simple Steps To Resolve The Issue
To fix the automobile fault code p1825, start by checking the possible causes and visually inspecting the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code P1825, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P1825 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code P1825 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P1825 Fault Code: Understanding The Description And Troubleshooting Steps
The P1825 fault code refers to an issue with the Internal Mode Switch (IMS) assembly in the transmission.
This assembly is a sliding contact switch that is connected to the control valve body. It provides four inputs to the Transmission Control Module (TCM) to indicate the selected position of the transmission manual shaft.
The TCM receives a high voltage when the switch is open and a low voltage when the switch is closed to ground.
The scan tool displays the state of each input as IMS.
The P1825 code specifically indicates that the Internal Mode Switch is in an invalid range.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1825 could be the culprit. This code is often caused by a faulty internal mode switch or issues with the internal mode switch harness, such as an open or shorted circuit or poor electrical connection. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
If you’re dealing with the P1825 fault code and notice that your engine light is on, it’s time to take action. The most common cause of this issue is a faulty Internal Mode Switch or problems with the wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the issue quickly.
When resolving the P1825 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can effectively fix the problem and resolve the fault code.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Internal Mode Switch or issues with the wiring harness and connectors. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion. Also, check for broken or bent pins.
