The automobile fault code P179E indicates a problem with the Drive Range Sensor. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing.
The cause of this fault code could be a faulty Drive Range Sensor, an open or shorted harness, or a poor electrical connection in the Drive Range Sensor circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this problem is estimated to be 1.0. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P179E
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p179e fault code.
- The symptoms of the automobile fault code P179E include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P179E?
The automobile fault code P179E can be caused by a faulty Drive Range Sensor, an open or shorted Drive Range Sensor harness, or a poor electrical connection in the Drive Range Sensor circuit.
- The fault code P179E can be caused by the following: 1.
- Faulty Drive Range Sensor.
- 2.
- Drive Range Sensor harness is open or shorted.
- 3.
- Drive Range Sensor circuit has a poor electrical connection.
- Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
- Works anywhere, even with limited connectivity, making it highly versatile.
- Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
- Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
- Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
- Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Fixing Code P179E: Simple Steps To Resolve The Issue
To fix the automobile fault code p179e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P179E, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P179E – Cost And Complexity Unveiled!
The automobile fault code P179E can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P179E Fault Code: Understanding The Transmission Control Module Failure
The P179E fault code refers to an issue with the Drive Range Sensor in your vehicle. The Engine Control Module (ECM) is responsible for monitoring this sensor. When the Drive Range Sensor does not meet the factory specifications, the ECM will set the P179E code.
This code specifically indicates an electrical problem with the Drive Range Sensor.
It is important to address this issue promptly to ensure proper functioning of your vehicle.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P179E could be the culprit. This code is often caused by a faulty drive range sensor, an open or shorted drive range sensor harness, or a poor electrical connection in the drive range sensor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P179E fault code and notice that your engine light is on, it’s time to take action. The most common cause of this issue is a faulty Drive Range Sensor or problems with the sensor’s wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are pushed out. This simple step can help you identify and resolve the issue quickly.
When resolving the P179E fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the fault code. By identifying and addressing these issues, you can effectively resolve the problem and clear the engine light or service engine soon warning light.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Drive Range Sensor. To fix this issue, visually inspect the wiring harness and connectors for any damage.
Also, check for broken, bent, pushed out, or corroded connector pins.