[SOLVED] P1770 Code: Fixing Differential Lock Solenoid Circuit Malfunction Made Easy!

The automobile fault code P1770 indicates a problem with the SLD Solenoid (Differential Lock Solenoid). This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate.

The possible causes include a faulty SLD Solenoid, an open or shorted SLD Solenoid harness, a poor electrical connection in the SLD Solenoid circuit, or a faulty Engine Control Module (ECM). To fix this issue, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be 1.0.

It is important to address this fault code promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1770 fault code.

  • The symptoms of the automobile fault code P1770 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code P1770 can be caused by a faulty SLD solenoid, an open or shorted SLD solenoid harness, a poor electrical connection in the SLD solenoid circuit, or a faulty Engine Control Module (ECM).

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

  • The fault code P1770 can be caused by a faulty SLD Solenoid (Differential Lock Solenoid), an open or shorted SLD Solenoid harness, a poor electrical connection in the SLD Solenoid circuit, or a faulty Engine Control Module (ECM).

To fix the automobile fault code p1770, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1770, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1770 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p1770 fault code.

The P1770 fault code refers to a problem with the Differential Lock Solenoid or SLD Solenoid in your automobile. This solenoid is responsible for controlling the hydraulic pressure applied to the center differential clutch, which helps maintain a limited-slip differential level. The Engine Control Module (ECM) plays a crucial role in this process.

It determines the optimal operating pressure based on signals from the throttle position sensor, as well as the front and rear speed sensors. The ECM then controls the volume of current flowing to the SLD solenoid accordingly. When the SLD solenoid output signal remains on for 3.3 milliseconds or longer, with a duty ratio of at least 5 percent, the Diagnostic Trouble Code (DTC) P1770 is triggered.

This indicates a circuit malfunction with the Differential Lock Solenoid.

It is important to address this issue promptly to ensure the proper functioning of your vehicle’s differential system.

What are the possible causes of the automobile fault code p1770 and how can I visually inspect them?

If you’re seeing the engine light or service engine soon warning light and have a fault code of p1770, there are a few possible causes to consider. One is a faulty SLD solenoid (differential lock solenoid), while another could be an open or shorted SLD solenoid harness. It’s also worth checking for poor electrical connections in the SLD solenoid circuit or a faulty engine control module (ECM). To visually inspect these potential causes, take a look at the related wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, or corrosion.

How does a faulty SLD Solenoid (Differential Lock Solenoid) contribute to the engine light being ON and what steps can I take to fix it?

If you notice that your engine light is on or you see a service engine soon warning light, it could be due to a faulty SLD Solenoid (Differential Lock Solenoid). This can happen if the SLD Solenoid harness is open or shorted, if there is a poor electrical connection in the SLD Solenoid circuit, or if the Engine Control Module (ECM) is faulty. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors.

Can a poor electrical connection in the SLD Solenoid circuit lead to the engine light being ON, and if so, what should I look for when inspecting the wiring harness and connectors?

A poor electrical connection in the SLD Solenoid circuit can indeed lead to the engine light being ON. When inspecting the wiring harness and connectors, look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. Visually inspect the related wiring harness and connectors to ensure there are no damaged components. Checking for these issues can help identify and fix the problem.

p1770 error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty SLD solenoid, an open or shorted SLD solenoid harness, a poor electrical connection in the SLD solenoid circuit, or a faulty Engine Control Module (ECM). To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top