[SOLVED] P16F7 Code: Fixing Control Module Pressure Control Solenoid Command Error

The automobile fault code P16F7 indicates a problem with the Transmission Control Module (TCM).

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty TCM, an open or shorted TCM harness, or a poor electrical connection in the TCM circuit.

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the transmission system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the p16f7 fault code appears, the Engine Light will illuminate, indicating a potential issue with your vehicle.

  • The symptoms of the automobile fault code p16f7 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p16f7 can be caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit.

  • The fault code p16f7 can be caused by a faulty Transmission Control Module (TCM).
  • It can also be caused by an open or shorted TCM harness.
  • Additionally, a poor electrical connection in the Transmission Control Module (TCM) circuit can also trigger this fault code.

To fix the p16f7 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p16f7, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p16f7 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges from $75 to $150.

The P16F7 fault code indicates an internal fault detected in the Transmission Control Module (TCM).

The TCM is a component of the control solenoid valve assembly and cannot be serviced separately. This fault is managed within the TCM itself, and there are no external circuits involved. The P16F7 code specifically refers to the Control Module Pressure Control Solenoid Command I.

This means that there is an issue with the command being sent to the pressure control solenoid within the TCM. It is important to address this fault promptly to ensure proper functioning of the transmission system.

What are the possible causes for the automobile fault code p16f7?

If you see the engine light or service engine soon warning light on, the fault code P16F7 could be the culprit. This code is often caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to resolve the fault code.

How can I visually inspect the wiring harness and connectors to fix the fault code p16f7?

If you’re dealing with the fault code p16f7 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix the issue, visually inspect the wiring harness and connectors. Keep an eye out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. This step will help you identify and address any issues with the wiring.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p16f7?

When troubleshooting the fault code p16f7, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a faulty Transmission Control Module (TCM) or poor electrical connection in the TCM circuit. By checking for these potential causes, you can effectively resolve the issue and turn off the Engine Light or Service Engine Soon Warning Light.

p16f7 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p16f7 fault code might be the culprit. This code is usually caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top