The automobile fault code P16F2 indicates a problem with the Drive Motor Generator Power Inverter Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty module, an open or shorted harness, or a poor electrical connection. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p16f2 fault code.

  • The symptoms of the automobile fault code p16f2 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p16f2 can be caused by a faulty Drive Motor Generator Power Inverter Module, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code P16F2 can be caused by the following: 1.
  • Faulty Drive Motor Generator Power Inverter Module.
  • 2.
  • Open or shorted harness of the Drive Motor Generator Power Inverter Module.
  • 3.
  • Poor electrical connection in the Drive Motor Generator Power Inverter Module circuit.

To fix the automobile fault code p16f2, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p16f2, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p16f2 are the estimated repair time of 1.0 hour and the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P16F2 fault code refers to the Control Module Transmission Direction Range Switch in the hybrid powertrain control module.

This code is triggered when the module compares the requested direction from the internal mode switch to other data and finds that the indicated direction range switch calculation is incorrect. In simpler terms, this fault code indicates a problem with the transmission direction range switch in the control module.

The module is responsible for determining the correct direction for the transmission based on various inputs. When the P16F2 code appears, it means that the module has detected an error in the calculation of the transmission direction range switch.

If you encounter this fault code, it is important to have it diagnosed and repaired promptly. Ignoring the issue can lead to further complications with the transmission system. A qualified technician will be able to identify the specific cause of the problem and perform the necessary repairs or replacements to resolve the P16F2 fault code.

What are the possible causes of the automobile fault code P16F2?

If you see the engine light or service engine soon warning light on, the fault code P16F2 could be the culprit. This code is often caused by a faulty drive motor generator power inverter module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the P16F2 fault code?

If you’re dealing with the P16F2 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Drive Motor Generator Power Inverter Module or issues with its harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. Don’t delay, get to the bottom of this issue and ensure a smooth ride ahead.

What should I look for when checking for damaged components and connector pins to resolve the P16F2 fault code?

To resolve the P16F2 fault code, start by visually inspecting the wiring harness and connectors related to the Drive Motor Generator Power Inverter Module. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection and trigger the engine light to come on. By checking and addressing these potential causes, you can effectively resolve the P16F2 fault code.

p16f2 error fault code explained

If your engine light is on and you’re getting the P16F2 fault code, it could be due to a faulty Drive Motor Generator Power Inverter Module or issues with the module’s harness or electrical connection.

To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Make sure to also look out for broken or bent pins on the connectors.

Scroll to Top