The automobile fault code P1692 indicates a problem with the Oil Control Valve (OCV).
The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty OCV, an open or shorted OCV harness, a poor electrical connection in the OCV circuit, or a faulty Engine Control Module (ECM).
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Mystery: Unveiling The Symptoms Of Code P1692
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1692 fault code.
- The symptoms of the automobile fault code P1692 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Decoding The Causes Of Code P1692
The automobile fault code p1692 can be caused by a faulty Oil Control Valve (OCV), an open or shorted OCV harness, a poor electrical connection in the OCV circuit, or a faulty Engine Control Module (ECM).
- The fault code P1692 can be caused by the following: a faulty Oil Control Valve (OCV), an open or shorted OCV harness, a poor electrical connection in the OCV circuit, or a faulty Engine Control Module (ECM).
Fixing Code P1692: Simple Steps To Resolve The Issue
To fix the automobile fault code p1692, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1692, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1692 Fixing Cost And Complexity Unveiled!
The automobile fault code P1692 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services.
P1692 Fault Code: Unusual Voltage Detected In Ecm Power Supply
The P1692 fault code refers to a malfunction in the OCV (Oil Control Valve) for VVTL (Variable Valve Timing & Lift) system. This system is responsible for switching the locker arm from low speed to high speed when the engine speed reaches 6,000 rpm. The Engine Control Module (ECM) controls the OCV to apply hydraulic pressure to the piston in the locker arm, allowing it to switch by locking the slipper for high speed.
However, when the OCV for VVTL is open, it indicates a problem with this process.
FAQ
If you’re seeing the fault code P1692 and your engine light is on, it could be due to a faulty Oil Control Valve (OCV), an open or shorted OCV harness, a poor electrical connection in the OCV circuit, or a faulty Engine Control Module (ECM). To visually inspect these possible causes, check the wiring harness and connectors related to the OCV. Look for any damaged components and examine the connector’s pins for any signs of being broken, bent, pushed out, or corroded.
If you notice that your engine light is ON or you see a Service Engine Soon Warning Light, it could be due to a faulty Oil Control Valve (OCV). This can happen if the OCV harness is open or shorted, if there is a poor electrical connection in the OCV circuit, or if the Engine Control Module (ECM) is faulty. To fix this issue, you should check the possible causes mentioned above. Take a close look at the wiring harness and connectors, inspect for any damage or broken components, and check for any bent, pushed out, or corroded pins in the connectors.
If you suspect that the Oil Control Valve (OCV) harness is open or shorted, or if you want to check for poor electrical connections in the OCV circuit, there are a few steps you can take. First, visually inspect the related wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, or corrosion. Additionally, check for any damaged components. By doing these checks, you can identify any issues and take the necessary steps to fix them.
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the culprit could be the p1692 fault code. This is usually caused by a faulty Oil Control Valve (OCV), an open or shorted OCV harness, a poor electrical connection in the OCV circuit, or a faulty Engine Control Module (ECM). To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
