The automobile fault code P167D indicates a problem with the Ignition Coil driver Module.
This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate.
The possible causes include a faulty Ignition Coil driver Module, an open or shorted harness, or a poor electrical connection in the circuit.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this problem is estimated to be around 1.0 hour.
It is important to address this issue promptly to prevent further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Fault Code P167D
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p167d fault code.
- The symptoms of the automobile fault code p167d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P167D?
The automobile fault code p167d can be caused by a faulty Ignition Coil driver Module, an open or shorted harness, or a poor electrical connection in the circuit.
- The fault code P167D can be caused by the following: 1.
- Faulty Ignition Coil driver Module.
- 2.
- Open or shorted harness of the Ignition Coil driver Module.
- 3.
- Poor electrical connection in the Ignition Coil driver Module circuit.
Fixing Code P167D: Simple Steps To Resolve The Issue
To fix the automobile fault code p167d, start by checking the possible causes and visually inspecting the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p167d, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P167D – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p167d are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.
P167D Fault Code: Understanding The Description And Troubleshooting Steps
The P167D fault code indicates a problem with the integrated circuits of the Ignition Coil driver Module. The Engine Control Module (ECM) has detected this issue when it persists for more than 4 seconds or accumulates to a total of 30 seconds. This fault code is specifically related to the internal circuitry of the ignition coil control module.
It is important to address this issue promptly to ensure proper functioning of the ignition system and prevent potential engine performance problems.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P167D could be the culprit. This code is often caused by a faulty ignition coil driver module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to check the possible causes mentioned above.
To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes. Then, visually inspect the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues with the Ignition Coil driver Module and its circuit connections.
When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components and corroded connector pins. These issues can be caused by a faulty ignition coil driver module, an open or shorted harness, or a poor electrical connection. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors.
Wrap Up
If your engine light is on and you’re seeing the p167d fault code, it could be due to a faulty Ignition Coil driver Module or issues with the module’s harness or electrical connection. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins as well.
