The automobile fault code P1670 indicates a problem with the Injector Driver Module (IDM) circuit. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.
The possible causes include an open fuse, a faulty IDM relay, open or shorted IDM enable circuit, open or short in EF circuit, open or short in Fuel Delivery Command Signal (FDCS) circuit, or faulty Powertrain Control Module (PCM). To fix this issue, you should visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling The Mystery: Symptoms Of Fault Code P1670 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1670 fault code.
- The symptoms of the automobile fault code P1670 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1670?
The automobile fault code p1670 can be caused by various factors, including an open fuse, a faulty Injector Driver Module (IDM) relay, and open or shorted circuits related to the IDM and fuel delivery.
- The fault code P1670 can be caused by various factors, including an open fuse, a faulty Injector Driver Module (IDM) relay, an open or shorted Injector Driver Module (IDM) enable circuit, an open or short in the EF circuit, an open or short in the Fuel Delivery Command Signal (FDCS) circuit, issues with the Injector Driver Module (IDM) powering circuits, and a faulty Powertrain Control Module (PCM).
Fixing Code P1670: Simple Steps To Get Your Car Running Smoothly!
To fix the p1670 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1670, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1670 Fixing Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p1670 are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p1670 fault code.
P1670 Fault Code: Understanding The Cause And Solution
The P1670 fault code refers to the Electronic Feedback Signal N. This code is related to the Injector Driver Module (IDM) in the vehicle. The IDM is responsible for providing the EF output signal to the Powertrain Control Module (PCM) to confirm the correct timing and duration of the Fuel Delivery Command Signal (FDCS).
It also sends diagnostic information about the IDM and injectors to the PCM. When this fault code appears, it indicates that there is an issue with the electronic feedback signal in the IDM. This could be caused by a variety of factors, such as a faulty IDM or a problem with the wiring or connectors.
It is important to address this issue promptly to ensure proper functioning of the fuel delivery system in the vehicle.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P1670 could be the culprit. This code can be caused by a variety of issues, including an open fuse, a faulty Injector Driver Module (IDM) relay, an open or shorted IDM enable circuit, an open or short in the EF circuit, an open or short in the Fuel Delivery Command Signal (FDCS) circuit, or faulty Powertrain Control Module (PCM). To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors for any visual damage, and inspect for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P1670 fault code and notice that your engine light is on, it’s time to take action. The cause could be an open fuse, a faulty Injector Driver Module (IDM) relay, or various other issues. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or corroded pins. This step is crucial in identifying and resolving the problem. Don’t forget to check the other possible causes as well.
If you’re dealing with the P1670 fault code and your engine light is on, there are a few things you should check. Start by inspecting the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. Additionally, make sure to check the fuse, the Injector Driver Module (IDM) relay, and the various circuits mentioned in the possible causes. By visually inspecting these components and connector pins, you can identify any issues and take the necessary steps to resolve the fault code.
Wrap Up
If your engine light is on and you’re seeing the P1670 fault code, there are a few possible causes to consider. It could be an open fuse, a faulty Injector Driver Module (IDM) relay, or an issue with the wiring circuits.
To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.
