[SOLVED] P1357 Code: Ignition Diagnostic Monitor – Fixing Pulsewidth Issue

The automobile fault code P1357 indicates a problem with the pick-up coil or crankshaft position sensor, as well as a faulty ignition control module.

The most noticeable symptom is the engine light being illuminated or the service engine soon warning light. To fix this issue, it is important to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this fault code is estimated to be around 1.0.

It is crucial to address this issue promptly to prevent further damage to the vehicle’s engine.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1357 fault code.

  • The symptoms of the automobile fault code P1357 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1357 can be caused by a faulty pick-up coil or crankshaft position sensor, as well as a faulty ignition control module.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

  • The fault code P1357 can be caused by a faulty pick-up coil or crankshaft position sensor.
  • It can also be caused by a faulty ignition control module.

To fix the automobile fault code p1357, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1357, you need to follow these steps: 1.
  • Check the “Possible Causes” mentioned above.
  • 2.
  • Visually inspect the related wiring harness and connectors.
  • 3.
  • Look for damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded connector’s pins.
  • The estimated repair time for this fix is 1.0 hour.

The fault code p1357 can be diagnosed and fixed within an estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for such repairs.

The P1357 fault code is a generic description for the Ignition Diagnostic Monitor Pulsewidth Not Defined.

However, the specific description may vary depending on the make and model of your vehicle. Unfortunately, we do not have any additional information about this particular OBDII code at the moment. If you have any further questions or need more information, please feel free to post your query in the comments section below.

What are the possible causes of the automobile fault code P1357?

If you see the engine light or service engine soon warning light on, the fault code P1357 could be the culprit. This code is often caused by a faulty pick-up coil or crankshaft position sensor, as well as a faulty ignition control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P1357 fault code?

If you’re dealing with the P1357 fault code and your engine light is on, it’s time to take action. The possible causes could be a faulty pick-up coil or crankshaft position sensor, or a faulty ignition control module. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This step is crucial in identifying and resolving the problem.

What should I look for when checking for damaged components or corroded connector pins to resolve the P1357 fault code?

When resolving the P1357 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause the engine light to turn on. By addressing these potential causes, such as a faulty pick-up coil or crankshaft position sensor, or a faulty ignition control module, you can effectively fix the problem.

p1357 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Pick-up coil or crankshaft position sensor, or a faulty Ignition Control Module. To fix this, check the possible causes mentioned above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded connector pins.

Scroll to Top